Porting Corvette TB
Thread Starter
Teching In
Joined: May 2007
Posts: 2
Likes: 0
Porting Corvette TB I'm going to port my Corvette (2002) TB, but the "torx" bolts on the TPS have tabs on/in them. The tabs don't allow me to put the torx head into the bolt. What the heck is going on here? Special tool needed? 
You probably need the Torx bits that have a hole in the middle. I think I've heard them referred to as "safety torx" before, but can't remember. I bought a little bit-kit from Advance Auto that I use all the time. Has tons of bits, and was only like $5. 
http://i18.tinypic.com/4cjlbw0.jpg
You'll see the bits I was talking about it on the right side, 2nd row from the top. Those allen bits work well in the 1/4" ratchet adapter too.
http://i18.tinypic.com/4cjlbw0.jpg
You'll see the bits I was talking about it on the right side, 2nd row from the top. Those allen bits work well in the 1/4" ratchet adapter too.
