ProjectCamaro

iTrader: (26)

I tried to search but it wouldn't work for me.

My car has all the bolton's and is cammed. I was searching online for an intake manifold and found a local guy selling a FAST 78mm intake for a good deal and it's still in the box.
My question is does this intake just take the stock TB? If so this'll just make the deal better for me since I already have a ported/polished TB on there.

Thank you for your help in advance.

sidewayz28

iTrader: (24)

might as well get the FAST 90, and i run a PTM 90mm TB

PowerShift408

iTrader: (44)

I'd stick with the 78 on a stock cube motor. As far as a throttle body, just port your stocker and you'll be good to go.

staringback05

iTrader: (8)

fast 90mm....

TVWilkes

Call TSP, and get the PTM 90 mm.

01Z0H6

iTrader: (63)

Fast 90/90...

radkon

iTrader: (2)

Stock T/B ported and polished. A Fast 90 TB will not bolt up to the 78 FAST intake.

echo3313

iTrader: (3)

get a 90mm fast and either a NIck Williams or LS2 proted throttle body

ProjectCamaro

iTrader: (26)

I was asking which TB goes on the 78MM FAST intake. Not which intake to buy, like I said I found a great deal on a brand new 78mm intake. That and the car is just a cammed car and it's not a huge cam so I wouldn't lose driveability so the 90mm would be over kill.



Thank you for the rest of you that said I can use my stock ported/polished TB on it.

Thule

get the 78mm NW tb