about to do headers....what else do I need?
Thread Starter
TECH Fanatic
iTrader: (7)
Joined: Mar 2007
Posts: 1,083
Likes: 0
From: middle of nowhere, IL
about to do headers....what else do I need? I am about to order Hooker LTs...what else do I need to make this install a snap? Here's my partial list:
obviously...the headers!
stage 8 locking bolts
MSD wires
do I need new tranny/motor mounts? the car has 45K miles and its an A4
what is the official part # for TR55 plugs?
reuse stock header gaskets or get fancy ones?
I am building a custom TD setup, so I will mess with the rest of that at a later date.
obviously...the headers!
stage 8 locking bolts
MSD wires
do I need new tranny/motor mounts? the car has 45K miles and its an A4
what is the official part # for TR55 plugs?
reuse stock header gaskets or get fancy ones?
I am building a custom TD setup, so I will mess with the rest of that at a later date.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Link in sig that covers a few things. IMO you don't need the Stg8s, just clean/reuse the stock bolts or get some ARPs. Stock header gaskets are fine (get new ones if your's look like they've been through hell). Good luck.
-J
-J
Originally Posted by turbowhistle86
I am about to order Hooker LTs...what else do I need to make this install a snap? Here's my partial list:
obviously...the headers!
stage 8 locking bolts
MSD wires
do I need new tranny/motor mounts? the car has 45K miles and its an A4
what is the official part # for TR55 plugs?
reuse stock header gaskets or get fancy ones?
I am building a custom TD setup, so I will mess with the rest of that at a later date.
obviously...the headers!
stage 8 locking bolts
MSD wires
do I need new tranny/motor mounts? the car has 45K miles and its an A4
what is the official part # for TR55 plugs?
reuse stock header gaskets or get fancy ones?
I am building a custom TD setup, so I will mess with the rest of that at a later date.
Percy's aluminum gaskets
LS2 manifold bolts with anitseize
MSD wires / AC Delco iridium plugs
I also had to get some new 02 sensors because they either stripped or wouldn't come out. You might also need a small hack saw (or Sawzall) to remove the casting tab on the driver's side of the block.
I sent my computer to Wait4me for the tune.