KOOKS new 2" race header
Thread Starter
LS1TECH Sponsor
Joined: Aug 2005
Posts: 151
Likes: 1
From: Statesville NC
KOOKS new 2" race header Kooks would like to let everyone know about our new 2" race header for the ls1 Fbody cars. It is made of 304S/S. It features equal length primarys. Weld on collectors with our velocity spike for the increase of exhaust scavaging. These headers are also avaliable with the LS7 d port flanges for the l92 and the LS7 heads.Here is a link to our new product page of our website showing and telling you all about them.http://www.kookscustomheaders.com/show.php?pid=840
Originally Posted by GeorgeR@kooks
Kooks would like to let everyone know about our new 2" race header for the ls1 Fbody cars. It is made of 304S/S. It features equal length primarys. Weld on collectors with our velocity spike for the increase of exhaust scavaging. These headers are also avaliable with the LS7 d port flanges for the l92 and the LS7 heads.Here is a link to our new product page of our website showing and telling you all about them.http://www.kookscustomheaders.com/show.php?pid=840
Any dyno sheets for forced induction or stroker motors?? You guys make an awesome product
. 
Teching In
Joined: Oct 2006
Posts: 41
Likes: 0
These look like larger versions of your current systems. I had a set in my 98 and I like how they worked but they aren't even close to equal length. I recall a 6-7 inch difference between the longest and shortest tube. Did you miss speak or is there something I'm missing here?
Thread Starter
LS1TECH Sponsor
Joined: Aug 2005
Posts: 151
Likes: 1
From: Statesville NC
Originally Posted by BigArchidia
These look like larger versions of your current systems. I had a set in my 98 and I like how they worked but they aren't even close to equal length. I recall a 6-7 inch difference between the longest and shortest tube. Did you miss speak or is there something I'm missing here?
i SEE WHERE THIS IS GOING TO GO I CHECKED OUT ALL 42 OF YOUR PREVIOUS POST'S. I DO NOT HAVE TIME FOR THIS BS. THANKS FOR THE COMPLIMENT THAT THEY WORKED WELL FOR YOU.
BigArchidia = registered email of oldsguru@aol.com
http://www.oldspower.com/vb/archive/...hp?t-6851.html
Based on this post old post from a few years ago, you are Nick Filippides.
This post was originally made by Nick Filippides 10jan03, I am resubmitting it in support of his project.
I am currently in the process of starting a project. One that depends greatly on the response of the Olds community. I'm working on getting a new High Performance cast iron 455 Olds block manufactured. You heard right! High Perf 455 block. I've made all the nessesary contacts with an engineer and foundary. Most of the important details as to what upgrades will be made to the new blocks have already been finalized. Let's just say these blocks will be built to handle anything you can throw at them; this includes nitrous, blowers, turbo chargers etc..
The blocks will cost $3800.00, which is about the same price as any other high perf aftermarket block out there excluding Chevrolet. If your really interested you can find me at oldsguru@aol.com or you can call me at home 631-477-3310 (evenings). If your not in the market then if you can please do your best to spread the word. You have to agree, if this deal comes to fruition, it may be the best thing to happen to the Olds community in a very long time. Thank You Nick Filippides
(oldsguru) Nick please don't troll other header company's thread, all I can say is wow. I'd give you a 90 ban but I think it's embarrassing enough that I could figure this out in 2 minutes. I also traced the IP and I can tell you are on LI too. Wow.
ADMIN
http://www.oldspower.com/vb/archive/...hp?t-6851.html
Based on this post old post from a few years ago, you are Nick Filippides.
This post was originally made by Nick Filippides 10jan03, I am resubmitting it in support of his project.
I am currently in the process of starting a project. One that depends greatly on the response of the Olds community. I'm working on getting a new High Performance cast iron 455 Olds block manufactured. You heard right! High Perf 455 block. I've made all the nessesary contacts with an engineer and foundary. Most of the important details as to what upgrades will be made to the new blocks have already been finalized. Let's just say these blocks will be built to handle anything you can throw at them; this includes nitrous, blowers, turbo chargers etc..
The blocks will cost $3800.00, which is about the same price as any other high perf aftermarket block out there excluding Chevrolet. If your really interested you can find me at oldsguru@aol.com or you can call me at home 631-477-3310 (evenings). If your not in the market then if you can please do your best to spread the word. You have to agree, if this deal comes to fruition, it may be the best thing to happen to the Olds community in a very long time. Thank You Nick Filippides
(oldsguru)
ADMIN
Tech Resident
Joined: Jan 2006
Posts: 5,117
Likes: 3
From: Philly
Originally Posted by Pro Stock John
BigArchidia = registered email of oldsguru@aol.com
http://www.oldspower.com/vb/archive/...hp?t-6851.html
Based on this post old post from a few years ago, you are Nick Filippides.
Nick please don't troll other header company's thread, all I can say is wow. I'd give you a 90 ban but I think it's embarrassing enough that I could figure this out in 2 minutes. I also traced the IP and I can tell you are on LI too. Wow.
ADMIN
http://www.oldspower.com/vb/archive/...hp?t-6851.html
Based on this post old post from a few years ago, you are Nick Filippides.
Nick please don't troll other header company's thread, all I can say is wow. I'd give you a 90 ban but I think it's embarrassing enough that I could figure this out in 2 minutes. I also traced the IP and I can tell you are on LI too. Wow.
ADMIN
Wow. Just wow.
Is he the guy from ARH? Correct me if I'm wrong. If I'm wrong, I'll edit my post. PSJ
Originally Posted by Pro Stock John
BigArchidia = registered email of oldsguru@aol.com
http://www.oldspower.com/vb/archive/...hp?t-6851.html
Based on this post old post from a few years ago, you are Nick Filippides.
Nick please don't troll other header company's thread, all I can say is wow. I'd give you a 90 ban but I think it's embarrassing enough that I could figure this out in 2 minutes. I also traced the IP and I can tell you are on LI too. Wow.
ADMIN
http://www.oldspower.com/vb/archive/...hp?t-6851.html
Based on this post old post from a few years ago, you are Nick Filippides.
Nick please don't troll other header company's thread, all I can say is wow. I'd give you a 90 ban but I think it's embarrassing enough that I could figure this out in 2 minutes. I also traced the IP and I can tell you are on LI too. Wow.
ADMIN
that's funny ****!!! 
EDIT: Kinda makes me wonder what kinda blackmail you got on me John
Trending Topics
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by Matt @ SDPC
EDIT: Back to the point of this thread... I say keep it on track with the product... Nice Headers
Agreed, we've been waiting for these for a while!! Gotta love Kooks products!!!
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
Tech Resident
Joined: Jan 2006
Posts: 5,117
Likes: 3
From: Philly
Originally Posted by Soul TKR
what's "LI" ???
that's funny ****!!!
EDIT: Kinda makes me wonder what kinda blackmail you got on me John
that's funny ****!!! EDIT: Kinda makes me wonder what kinda blackmail you got on me John
There's nothing wrong with competition and a healthy rivalry, but c'mon...Kooks and QTP are both board sponsors. I see nothing wrong with ARH wanting to get a piece of the pie, but become a sponsor. Don't register an account just to troll the forums and bash the competition. It's so...dirty and underhanded IMO.
Personally, I think it's nice to see someone make a high quality 2" stainless header for the f-body. It's nice to see that over 10 years later, respected companies and individuals are still putting R&D into our cars.
George, can these headers be optioned with high velocity merge collectors? I think that's valuable information.
Originally Posted by ChocoTaco369
LI = Long Island, NY. I believe that's where ARH is located.
There's nothing wrong with competition and a healthy rivalry, but c'mon...Kooks and QTP are both board sponsors. I see nothing wrong with ARH wanting to get a piece of the pie, but become a sponsor. Don't register an account just to troll the forums and bash the competition. It's so...dirty and underhanded IMO.
Personally, I think it's nice to see someone make a high quality 2" stainless header for the f-body. It's nice to see that over 10 years later, respected companies and individuals are still putting R&D into our cars.
George, can these headers be optioned with high velocity merge collectors? I think that's valuable information.
There's nothing wrong with competition and a healthy rivalry, but c'mon...Kooks and QTP are both board sponsors. I see nothing wrong with ARH wanting to get a piece of the pie, but become a sponsor. Don't register an account just to troll the forums and bash the competition. It's so...dirty and underhanded IMO.
Personally, I think it's nice to see someone make a high quality 2" stainless header for the f-body. It's nice to see that over 10 years later, respected companies and individuals are still putting R&D into our cars.
George, can these headers be optioned with high velocity merge collectors? I think that's valuable information.
Kooks headers =
Thread Starter
LS1TECH Sponsor
Joined: Aug 2005
Posts: 151
Likes: 1
From: Statesville NC
Originally Posted by ChocoTaco369
Wow. Just wow.
Is he the guy from ARH? Correct me if I'm wrong. If I'm wrong, I'll edit my post. PSJ
He is one of the people from ARH, Matt I like his bio http://www.nmraracing.com/forums/member.php?u=1730
where he states 40 years exhaust exp! "He is 42 years old"!!!! How does that equate? He worked for us for 2.5 years. In the sales dept.
Originally Posted by GeorgeR@kooks
He is one of the people from ARH, Matt I like his bio http://www.nmraracing.com/forums/member.php?u=1730
where he states 40 years exhaust exp! "He is 42 years old"!!!! How does that equate? He worked for us for 2.5 years. In the sales dept.
where he states 40 years exhaust exp! "He is 42 years old"!!!! How does that equate? He worked for us for 2.5 years. In the sales dept.
Hey George... i've spoke to you a few times... i'm wondering if it was Nick I spoke to as well... I used to work at RKSport back in the day. I was the guy over there trying to persuade the management to carry your product... unfortunately those knuckleheads didn't care for many of my recommendations, but I was just a number there so...
Originally Posted by Soul TKR
Kooks headers =
LOL Soul TKR that gif made me laugh out loud at work!
Originally Posted by l337_haxs
Well I am glad to see some 2" headers! Can't wait to see what type of power differences they will make!!!
LOL Soul TKR that gif made me laugh out loud at work!
LOL Soul TKR that gif made me laugh out loud at work!
Thread Starter
LS1TECH Sponsor
Joined: Aug 2005
Posts: 151
Likes: 1
From: Statesville NC
[QUOTE=ChocoTaco369]LI = Long Island, NY. I believe that's where ARH is located.
There's nothing wrong with competition and a healthy rivalry, but c'mon...Kooks and QTP are both board sponsors. I see nothing wrong with ARH wanting to get a piece of the pie, but become a sponsor. Don't register an account just to troll the forums and bash the competition. It's so...dirty and underhanded IMO.
Personally, I think it's nice to see someone make a high quality 2" stainless header for the f-body. It's nice to see that over 10 years later, respected companies and individuals are still putting R&D into our cars.
George, can these headers be optioned with high velocity merge collectors? I think that's valuable information.[/QUOTE]
Yes they can? you can give me a call for all your exhaust needs. 1 866 586 KOOK
There's nothing wrong with competition and a healthy rivalry, but c'mon...Kooks and QTP are both board sponsors. I see nothing wrong with ARH wanting to get a piece of the pie, but become a sponsor. Don't register an account just to troll the forums and bash the competition. It's so...dirty and underhanded IMO.
Personally, I think it's nice to see someone make a high quality 2" stainless header for the f-body. It's nice to see that over 10 years later, respected companies and individuals are still putting R&D into our cars.
George, can these headers be optioned with high velocity merge collectors? I think that's valuable information.[/QUOTE]
Yes they can? you can give me a call for all your exhaust needs. 1 866 586 KOOK