Are all 85mm MAF's made the same?
Thread Starter
10 Second Club
iTrader: (1)
Joined: Mar 2002
Posts: 1,088
Likes: 0
From: St.Louis, MO
Are all 85mm MAF's made the same? Are these the exact same thing?
http://cgi.ebay.com/ebaymotors/ws/eB...m=250139236679
http://paceperformance.com/index.asp...&ProdID=217863
If so, why are the prices so different?
http://cgi.ebay.com/ebaymotors/ws/eB...m=250139236679
http://paceperformance.com/index.asp...&ProdID=217863
If so, why are the prices so different?
They are the same critter and the difference is retail vs private
resale. That and warranty, though good luck on electricals. I run
an eBay 85mm and have a spare, got both at about that price.
There are a couple of part numbers, one superseded another but
no evident difference in the guts, minor platform-platform table
differences in the tune files. I found the 6.0 truck table fit well
pre-cam but the Z06 table better post-cam, my 85mm has the
screen removed ever since I got it. Mix-n-match, and tweak from
there.
resale. That and warranty, though good luck on electricals. I run
an eBay 85mm and have a spare, got both at about that price.
There are a couple of part numbers, one superseded another but
no evident difference in the guts, minor platform-platform table
differences in the tune files. I found the 6.0 truck table fit well
pre-cam but the Z06 table better post-cam, my 85mm has the
screen removed ever since I got it. Mix-n-match, and tweak from
there.
Thread Starter
10 Second Club
iTrader: (1)
Joined: Mar 2002
Posts: 1,088
Likes: 0
From: St.Louis, MO
Hey thanks for the info! Too bad there are no more available via the ebay route. I had to purchase from Pace at the higher price. 
I have a 383 LS1 stroker making about 600 HP at the engine. Would you suggest we use a Z06 MAF table? Does it matter what year Z06?
I have a 383 LS1 stroker making about 600 HP at the engine. Would you suggest we use a Z06 MAF table? Does it matter what year Z06?
