Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Estimate Horsepower!

Thread Tools
 
Search this Thread
 
Old 10-19-2007, 10:24 AM
  #1  
Teching In
Thread Starter
 
sick02ws6's Avatar
 
Join Date: Aug 2007
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Smile Estimate Horsepower!

Hey everyone... ive done alot of work to my 02 ws6 but havent taken it to a dyno just yet... can anyone tell me what they think i might be puttin down to the tires?

Hooker LT headers, Borla catless y pipe, Borla exhaust, SLP cold air induction w lid, ported MAF, ported TB, LS6 intake manifold, Total Engine Airflow stage 1.5 Heads, Comp XE-R XER273HR cam (224/230 .581/.592), HPTuned, ported oil pump, slp double roller timing chain, Built 4L60E trans, TCI 4000 stall, Dana60 rearend, 4:10 gear... all on 93 octane

If you might be able to calculate somethin out or have a buddy with a similar setup just let me know... thanks for the help
Old 10-19-2007, 10:40 AM
  #2  
Staging Lane
 
hotrod7687's Avatar
 
Join Date: Feb 2007
Location: Nacogdoches, TX
Posts: 96
Likes: 0
Received 0 Likes on 0 Posts

Default

Im going to guess somewhere in the 425 rwhp range.
Old 10-19-2007, 10:49 AM
  #3  
TECH Resident
 
RedWS6 00's Avatar
 
Join Date: Aug 2003
Location: England UK
Posts: 958
Received 3 Likes on 3 Posts

Default

I'd say about 390-400rwhp.
You'd be looking at about 480-490hp at the flywheel.
Old 10-19-2007, 10:53 AM
  #4  
TECH Regular
iTrader: (2)
 
Tuffguy610's Avatar
 
Join Date: Jul 2005
Location: Broomall, PA
Posts: 438
Likes: 0
Received 0 Likes on 0 Posts

Default

Thats a nice mod list! Im no pro, but after what I've seen on other cars I'd say around 420 rwhp. How much did all those mods cost? I want to do something similar to mine.
Old 10-19-2007, 11:05 AM
  #5  
12 Second Club
iTrader: (20)
 
litle88's Avatar
 
Join Date: Jan 2007
Location: Burbank, Illinois
Posts: 2,561
Received 4 Likes on 4 Posts

Default

I'd also say 420, that dana and the a4 are gonna hold you back a little.
But those are some nice MODS, congrats!!!
Old 10-19-2007, 11:50 AM
  #6  
Staging Lane
 
CaptainSS1's Avatar
 
Join Date: Aug 2007
Posts: 55
Likes: 0
Received 0 Likes on 0 Posts
Default

I just dropped in an LS6 with ported heads, 224/228-114 cam, Kooks, ORP, ported TB, UDP, Dyno-Tuned running thru a Moser 12 bolt 4.11's

412/400 rw... but that was on a dyno known to be low (about 10hp/tq) on a 90 degree day with high humidity and I found my tires to be 6 lbs low so...

mods are similar - I'd say you are looking at approx that up to 420-425 rw.
Old 10-19-2007, 03:13 PM
  #7  
TECH Enthusiast
iTrader: (8)
 
plaf713's Avatar
 
Join Date: Feb 2007
Location: schenectady, ny
Posts: 678
Likes: 0
Received 0 Likes on 0 Posts
Default

horsepower doesnt mean anything, what matters is what you do at the track i'll say 11.4s if you can drive
Old 10-19-2007, 03:34 PM
  #8  
TECH Enthusiast
iTrader: (4)
 
John02Hawk's Avatar
 
Join Date: Sep 2003
Location: Rogers, Ark.
Posts: 701
Likes: 0
Received 0 Likes on 0 Posts

Default

410rwhp, your stall robs quite a few ponies.
Old 10-19-2007, 04:21 PM
  #9  
Staging Lane
 
CaptainSS1's Avatar
 
Join Date: Aug 2007
Posts: 55
Likes: 0
Received 0 Likes on 0 Posts
Default

What I think matters is how your car runs, where the power is in the power band and whether you can't wait for the next chance to get behind the wheel .... but that may just be me.
Old 10-20-2007, 01:49 PM
  #10  
TECH Senior Member
iTrader: (39)
 
TORCHD 02 TA's Avatar
 
Join Date: May 2006
Location: Chicago
Posts: 7,883
Likes: 0
Received 2 Likes on 2 Posts
Default

i ahve all the same mods you have..... but i have slightly bigger cam and different exhaust..

See sig for numbers




All times are GMT -5. The time now is 01:26 AM.