LS1>Imports

iTrader: (2)

alright guys i have the bassani tru-dual x pipes, and jus ordered my headers,
so whats the best way to get them on to the headers weld them directly to the header, of does any body have a better idea....
thanks

Bonertee

iTrader: (1)

I would strongly advise NOT to weld them for the sake of having to remove the exhaust for whatever reason. Just my opinion. I slipped mine over the headers, made a mark on the headers about 3 inches to make sure they were on far enough, and used the supplied band clamps and have no leaks. With all that said, I don't know how Bassani exhaust connects to the headers but again, IMO do not weld them.

BlackScreaminMachine

iTrader: (17)

Do NOT weld, you will never get them off.

You can slip fit it, make sure the header goes into the larger x pipe and band clamp it, use black rtv, it should make up for gaps if your worried.