Exhaust question
Thread Starter
TECH Fanatic
iTrader: (6)
Joined: Sep 2007
Posts: 1,275
Likes: 0
From: Charlotte, NC / Ansonia,CT
Exhaust question Ok, i am receiving a nice set of 1 3/4 hooker LTs, i have the SLP exhaust on my 01 ws6(i bought it like this not sure if its factory or aftermarket) now i plan on installing the headers when i get them, what y pipe or x pipe would everyone recomend and should i keep my current exhaust or go with something else? and if so what? im workin on a tight budget keep in mind ;D
the cheapest way find a Y-pipe that matches to the stock SLP exhaust you have. I think TSP carries them. Now IMO i think f-bodies were supposed to have dual exhaust, so something like the TSP true dual would work or a custom system(not so feasible with your budjet probably).
Either way I would do a lot of research and try and be absolutely sure what you like before buying. there are many people on this forum that have purchased 3-5 different exhaust systems before finding the one they like. So I would say find people in your area and listen to their cars along with videos online to help in your choice.
Either way I would do a lot of research and try and be absolutely sure what you like before buying. there are many people on this forum that have purchased 3-5 different exhaust systems before finding the one they like. So I would say find people in your area and listen to their cars along with videos online to help in your choice.
Thread Starter
TECH Fanatic
iTrader: (6)
Joined: Sep 2007
Posts: 1,275
Likes: 0
From: Charlotte, NC / Ansonia,CT
the exhaust on it now is Single in dual out 3" SLP with the 2 tips on each side, i think u guys refer to it as dual dual? i like the sound it has but its not throaty enough for me. i am also considering cut outs, i have about 400$ to spend on exhuast/y pipe
http://www.texas-speed.com go look under 98-02 f body, exhaust...they make both a catback and a true dual system.
