ls6 INTAKE HP
Thread Starter
TECH Addict
iTrader: (10)
Joined: Dec 2007
Posts: 2,052
Likes: 1
From: Jacksonville, Fl
how much hp will i get off of an ls6 intake. i had someone tell me that you can get around 100 hp off of it and i think hes wrong. can anyone help me
Thread Starter
TECH Addict
iTrader: (10)
Joined: Dec 2007
Posts: 2,052
Likes: 1
From: Jacksonville, Fl
Trending Topics
I'd believe 10-15 HP, and about the same in torque. My dyno went up from 298HP to 306HP and 315ft/lb to 325ft/lb but at the same time I went with a heavier LS7 clutch which lost me some torque and HP.
In a nutshell, it's worth it. The gains will be higher if you factor in cam/headers/heads etc over a LS1.
In a nutshell, it's worth it. The gains will be higher if you factor in cam/headers/heads etc over a LS1.
LOLLLL
your friend doesnt know anything about LS1, dont ever let him touch your car.
100hp with an intake swap, he doesnt know anything about cars!!!!
100hp with an intake swap, he doesnt know anything about cars!!!!
As a good rule of thumb of MOST LS1's, the only ways to get 100 rwhp with one mod are nitrous, turbo or a supercharger. A cyclone, turbonator or strategically placed racing stickers will also net just short of 100 (HAHA!).
In all seriousness, you should see around 10 - 15 rwhp from swapping to the LS6 intake and the bulk of the gains are going to be up higher in the powerband.
In all seriousness, you should see around 10 - 15 rwhp from swapping to the LS6 intake and the bulk of the gains are going to be up higher in the powerband.



give that to your bud! 




