1BDBOTI

Anybody have any pics of FAST 90 install. I bought intake, TB, and fuel rails with fittings. What eles will i need to finish project. Other fittings, fuel lines, fuel pressure regulator, ???????? HELP

Disturbed Bird

iTrader: (9)

what fuel rails did you buy?

whats else is done to the car?

with the fast 90 you will need to buy the fast manifold gaskets. if you bought the fast throttle body return it and get anything but that one

00bluews6

iTrader: (3)

what year is your car

davered00ss

iTrader: (4)

found this on the board

kit from Nasty performance.

rails from fast wi fittings

Mine have been in the box for over a year.

1BDBOTI

i got a FAST 90 intake Fast fuel rails and FAST 90 TB.
The car is a 2002 SS

1BDBOTI

I have torn the motor down new rings, bearings, gaskets, MS4 cam, springs, pushrods, lifters, 410 gear with auborn unit, gonna buy new trans with a 2500 stall con., long tubes, tourqe arm, cut outs, x-pipe

Disturbed Bird

iTrader: (9)

you need to get rid of that throttle body it sticks. you need to get something else. i would get a NW 90MM.

you will need bigger injectors, a 12bolt rear end, yours will break soon.

i dont know about the fast rails but you may need a fuel pressure regulator. someone else might chime in on this statement

1BDBOTI

what size injectors????????What kind of injectors, wheres the best place to bye them??? I plan on buying a moser 9 inch later, daveredooss,,,, i cant find that nasty performance kit on there web site???? Do you maybe have a parts list of what fittings and size of fuel line??? Thanx

Disturbed Bird

iTrader: (9)

http://www.nastyperformance.com/FuelSystem.html

scroll down for the kit

Disturbed Bird

iTrader: (9)

well i hope your going to be doing heads with that cam, or you might be a little disapointed with the results. but if you were to do heads with it i would say go with 42lb injectors from harris speed works they are on sale
http://www.harrisspeedworks.com/shop...cat=331&page=1

1BDBOTI

what size injectors

globe

i dont think 2500rpm stall is a good idea on a with the MS4 prob want a stall around 4k to really wake that cam up. just my 2 cents

slowandrichws6

iTrader: (2)

i agree, thats a high rpm cam therefore if you want to get the most out of it i would go 4000 stall at the minimum.

1BDBOTI

You are right but this is going to be a street car, i have a full chassis 92 rs camaro i drag, its a beast

1BDBOTI

is the head porting worth the money

LS1-NAVY

iTrader: (1)

was gonna say the same thing

Disturbed Bird

iTrader: (9)

no buy a good set of heads: trickflow, etp, afr

00bluews6

iTrader: (3)

i got the #42 from racetronix and am very happy with them and they are on sale now http://www.racetronix.com/17113813.html

u might wont to get a 255 in tank pump dep. on what your fuel psi is if you end up doing that u might as well get the racetronix hot wire kit