Question about heads / cam
Question about heads / cam Hey guys, I bought a motor from a local guy, and swapped the cam in it. I'm wondering if the pushrods will be either too long / short now.
Here is what it had when I bought it:
LS1:
LS6 243 casting heads "untouched"
Roller Rockers 1.7 ratio
LS7 Lifters
7.45 inch Chromoly Pushrods
Patriot Gold Extreme .660 lift springs
Titanium Locks and Retainers
228/232 .600/.600 lift on 111LSA camshaft
Only thing I have changed is I installed a stock LS6 camshaft in it.
Am I going to blow up my junk when I turn the key?
Here is what it had when I bought it:
LS1:
LS6 243 casting heads "untouched"
Roller Rockers 1.7 ratio
LS7 Lifters
7.45 inch Chromoly Pushrods
Patriot Gold Extreme .660 lift springs
Titanium Locks and Retainers
228/232 .600/.600 lift on 111LSA camshaft
Only thing I have changed is I installed a stock LS6 camshaft in it.
Am I going to blow up my junk when I turn the key?
