first impressions with q45 TB

Reply Subscribe

Thread Tools

Search this Thread

Jun 25, 2008 | 12:49 PM

#21

Droptoplt1ta

Launching!

Joined: Nov 2005

Posts: 276

Likes: 2

From: Clinton Twp, MI

Jul 21, 2008 | 05:25 PM

#22

Ping King

Thread Starter

TECH Fanatic

iTrader: (20)

Joined: Feb 2003

Posts: 1,636

Likes: 9

From: PA

Updates. The nissan TPS works just fine, all you need to do is splice in the wiring with a weather pack connector.

Attached Thumbnails

first impressions with q45 TB-dsc04148.jpg

first impressions with q45 TB-dsc04149.jpg

first impressions with q45 TB-dsc04150.jpg

first impressions with q45 TB-dsc04151.jpg

first impressions with q45 TB-dsc04158.jpg

Jul 22, 2008 | 04:11 PM

#23

Beaflag VonRathburg

OWN3D BY MY PROF!

iTrader: (176)

Joined: Feb 2006

Posts: 9,146

Likes: 3

From: Jax Beach, Florida

Kudos on doing it yourself. You should do a before and after dyno comparison. That is if you ever dynoed it before.

Jul 22, 2008 | 09:44 PM

#24

NemeSS

TECH Senior Member

iTrader: (127)

Joined: Sep 2005

Posts: 6,889

Likes: 9

From: Houston,TX

sweet!
so a oem nissan tps will work correctly with the gm pcm and harness, after modification?
how does it affect tuning? what about the iac? any issues with that?
looks good, the nissan tps sends the appropriate signal to the pcm?

Jul 22, 2008 | 10:37 PM

#25

Ping King

Thread Starter

TECH Fanatic

iTrader: (20)

Joined: Feb 2003

Posts: 1,636

Likes: 9

From: PA

nissan signal sends everything just fine. all you need to do is set the sensor so that its at the correct voltage which is around .6v. there is no IAC, you just set the idle with the set screw and adjust the TPS to recognize the setting as zero percent.

Reply Subscribe