Problems caused my my Aeroforce...
Again I disconnected it and everything was fine. I contacted Aeroforce and they said sometimes the gauge can get a glitch and unplugging and plugging back up again will fix it. This Saturday the “service vehicle” came back on again and the brake light but the brake light went out and the service vehicle stayed on. About 2 miles up the road I noticed the car started to sound odd…a very pronounce sewing machine noise……more then the usual I have with my cam/springs and the exhausted sounded odd. It was gone next time I started to car up but then last night when I took the car out to take some photos of it the car started to sound odd again about 2 miles away like before…this time however no service vehicle or brake light. When I came to a stop and went to make a turn it sounded like a misfire and it hardly had any power. I unplugged the gauge and everything was fine. I sent Aeroforce an email and they told me to send it back and they’ll see if they can figure out what’s going on. So has anyone ever heard of this? It’s an older Interceptor btw… 1.4V. It seems that the gauge is shorting out somehow and causing my car to get incorrect readings…hence why it was running so oddly.
Last edited by Flamin' bird; Jul 15, 2008 at 04:59 PM.
Trending Topics
The Best V8 Stories One Small Block at Time




I"ll see what Aeroforce says. Figures I always get some wacky thing wrong with my car. 