ArklaTexan

iTrader: (24)

MEGA DEATH 244/242 .612/.610 112lsa


I loved it, Wife hated it, don't have it anymore

JBIRD02

iTrader: (4)

Yep, very choppy, even w/ a 1500rpm idle

I second this!!! Mine sounds awesome w/ td's. People tell me all the time it sounds like a big block

Midnight02

iTrader: (8)

I understand what you're going for and there are a LOT of ways to get there. Once you make a few slight adjustments to your exhaust note (long tube headers, off road y, catback, etc.), it will make cam lope much more noticeable. That being said, I'd pick up a pair of long tube headers and slap a cutout in your exhaust, then you can pick a cam that will actually work well with your driving and performance needs.

With the right exhaust setup, even a relatively mild cam on a 111 - 112 LSA will have a very nice lope. Check out my sig, I have a relatively mild cam, however the lope is very distinct and you can hear the thing coming from a LONG ways away!

hondakiller

iTrader: (3)

Any aftermarket cam will be lopey and "loud" if your exhaust is loud enough. My ws6 had a 224 single pattern on a 112LSA in it and it was very tame through the exhaust but through the cutout it sounded like a racecar. I had hooker lt's with an ORY and flowmaster merge before the cutout.

Nedermeyer

I run the Tommy Lee cam ( 242/248 113 LSA and .600 plus lift )

Very, very, very nasty sound, like it just got finished humping your girlfriend in the butt without lube and you're next....

blown03mustang

thats sig worthy!!!! hahahahah

mchdg86

iTrader: (3)

Just put a cut out on the end of each header collector and almost any cam will lope. The little TR224 on a 112 LSA loped pretty hard like that.