Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

fast 92mm

Thread Tools
 
Search this Thread
 
Old 08-11-2008 | 08:53 PM
  #1  
juniorz28's Avatar
Thread Starter
TECH Apprentice
iTrader: (4)
 
Joined: Jul 2008
Posts: 318
Likes: 2
Default fast 92mm

just ordered my nick williams 92mm throttle body and fast 92mm manifold...just wondering if anybody has these mods and what kind of numbers did they put down?
Old 08-11-2008 | 09:31 PM
  #2  
SOMbitch's Avatar
TECH Senior Member
iTrader: (8)
 
Joined: Sep 2007
Posts: 6,881
Likes: 3
Default

What other mods do have?
If you SEARCH most will say 15 or so over LS6. The more cubes you run and higher you spin the more gain as LS6 dies at 6200 or so. I was a little disapointed with my 90/90 but it went on with H/C so I have no baseline. I can say I expected #'s in sig with my LS6 and got the 90/90 for a good deal at the last minute. When I go bigger cubes though it will really pay off and the throttle response is AWESOME Looks good too!
Old 08-12-2008 | 01:11 AM
  #3  
transam69230's Avatar
11 Second Club
15 Year Member
iTrader: (49)
 
Joined: Feb 2005
Posts: 1,869
Likes: 22
From: Minnesota
Default

I know i picked up some in the quarter mile with the 92/92 combo over my ls6.
Old 08-12-2008 | 11:43 AM
  #4  
snake charmer's Avatar
TECH Fanatic

iTrader: (118)
 
Joined: Sep 2004
Posts: 1,510
Likes: 1
From: The south
Default

depending on your mods it will vary . like said cubes or putting down a good bit of power will help in getting more from the FAST setup . without mods like cam or heads you will only see a small gain .




All times are GMT -5. The time now is 06:22 PM.