Rockers?
Rockers? i just got a set of tea stage 2 heads and was wondering if i should use the stock rockers from my ls1 heads with 118k on them or buy a new set. if i go new what ratio should i go with? thanks
Trending Topics
Most cam grinds do not want you going 1.8. Unlike LTX where everything is 1.5 stock and they want you to be running 1.6.
Aside from a set of expensive *** Jesel rockers, stock is fine.
Aside from a set of expensive *** Jesel rockers, stock is fine.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo i wish i was cool, younger, etc. lol. thanks for the info guys. next i need to figure out what intake. waiting to see some numbers on the new intake that was just released.
well i would say have your stockers rebuilt.
are you still running the stock cam? - i didn't see a cam in your mod list.
depending on which cam you run, you can either run 1.8's for a lower lift cam or 1.7's for a higher lift.
if your sticking with the stock cam i would recommend the 1.8 ratio.
are you still running the stock cam? - i didn't see a cam in your mod list.
depending on which cam you run, you can either run 1.8's for a lower lift cam or 1.7's for a higher lift.
if your sticking with the stock cam i would recommend the 1.8 ratio.
