Cold air Kits
bout the same as a lid.
they really aren't a cold air kit....for that you need something like the SSRA or FTRA.
i say stick with a lid and a SSRA....cold air at slow speeds and true ram air at high speed
they really aren't a cold air kit....for that you need something like the SSRA or FTRA.
i say stick with a lid and a SSRA....cold air at slow speeds and true ram air at high speed
Staging Lane
Joined: Sep 2006
Posts: 62
Likes: 0
From: Los Angeles, CA.
I have the Volant CAI and love it- I had had for almost 2 years. I am not sure on the exact gain of the Volant alone because I didn't get the car dynoed afterwards, but I would say by feel alone maybe 12hp. However, hearing from other people that have gotten this intake, it really is only worth it if you have a WS6. The design of the Volant T/A works great w/a WS6 because the cones line up perfectly to the hood scoops. Debaffling the hood scoops only works better too... then you have air blowing directly at the cones. The rubber lining around the air box seals tightly under the hood- preventing air from dissipating and random debris to blow into your engine bay. Also.... whenever I pop the hood, it always gets a positive response. If you have a WS6- be different and get the Volant.
Thread Starter
Launching!
Joined: Apr 2007
Posts: 242
Likes: 0
I have an MTI lid and smooth bellows. The reason I'm looking for a CAK is because the lid fits like crap, and is already cracked. I've already tried trimming the tabs so it would fit better, no such luck. I think the main problem is the bellows, they are too stiff to allow the lid to fit. I'm afraid of stuff getting in past the filter. what is ssra, and ftra? A brand, or a sort of cold air kit?
Trending Topics
TECH Fanatic
iTrader: (4)
Joined: Jul 2003
Posts: 1,075
Likes: 0
From: Orange Park/ Jacksonville, FL
I love my Volant for all the reasons Drake02 mentioned above. However, like he also mentioned, I have a WS6 w/o baffles, so it works great for me. I would suggest you stick w/ a lid & one of the other above mentioned kits.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
I have an MTI lid and smooth bellows. The reason I'm looking for a CAK is because the lid fits like crap, and is already cracked. I've already tried trimming the tabs so it would fit better, no such luck. I think the main problem is the bellows, they are too stiff to allow the lid to fit. I'm afraid of stuff getting in past the filter. what is ssra, and ftra? A brand, or a sort of cold air kit?
The guys with the WS6s speak of the ram air and thats why they like them so much, so what if someone had a z28 with a ultra z hood and the volant intake, wouldnt that be the same principal?
