About the SLP Lid
About the SLP Lid Just wondering if I could simply order the SLP lid and install it with no lights coming up on my dash or anything. I'm a real newb here and just want to make sure that the mass air flow sensor plugs right in? If that makes any sense.
Thanks in advance.
Thanks in advance.
TECH Fanatic
iTrader: (4)
Joined: Jul 2003
Posts: 1,075
Likes: 0
From: Orange Park/ Jacksonville, FL
Yeah, you should have no problems at all. The hardest part is swapping the IAT while trying to be careful (but thats not even hard). There shouldn't be any ses lights as long as all the sensors are pluged in. Just install and go! Goodluck
Ok sounds easy enough. Only question is (keep in mind ME= NEWB lol) what is the IAT? Sounds like I SHOULD know what that is but can't seem to think of it. Hmmmmm. Also, how many ponies is this lid good for over the stocker one? Just curious.
5-10 ponys stock but the best first mod. A must to get the most out of future mods.
Iat- idle air temperature. Small sensor in lid on DS. Can't miss it. Just be careful not to tear the little rubber gasket it mounts in when you pull it out
thats fwhp, rwhp will be half that or at least was in my experience, you'll notice more gains with exhaust and intake but i'd wait on the intake untill and if you decide on heads or cam especially since you have a LS6 intake anyway . . . didn't most of the firehawks come with the blackwing lid anyway??????
Trending Topics
12 Second Club
Joined: Feb 2007
Posts: 150
Likes: 0
From: Fairfield, Cali
actually IAT stands for.. Intake Air temp. senor..
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Staging Lane
Joined: Jul 2008
Posts: 82
Likes: 0
just use pliers to rip out the noise reduction fins in the stock piece and a sand smooth the rest. Not only does it look stock but you can put your money into pulleys or something like that. theres two chambers left right before the MAF. i guess you could fill them with something that solidifies. lol
Thats the cheap *** method anyway : P
Thats the cheap *** method anyway : P
thats fwhp, rwhp will be half that or at least was in my experience, you'll notice more gains with exhaust and intake but i'd wait on the intake untill and if you decide on heads or cam especially since you have a LS6 intake anyway . . . didn't most of the firehawks come with the blackwing lid anyway??????
