I have a NA 408ci forged lq9 with AFR 225's 72cc, fast90/90, diamond pistons-2cc, and a M6 trans and was looking at this cam

Int. Lobe 3732 (244@0.050 .612" lift)
Exh. Lobe 3734 (248@0.050 .615" lift)
114 L.S.A. ground with an "ICL" 2 degrees
advanced (114+2)



I would like to see 500 hp so I can get a 10.5 or so


any input?

 

whats your compression gonna be with those heads?

could make it hard to hit your goal. the setup looks good for it, except the compression on the heads.

 

it should be about 10.8

 

That cam will put you very close to 500rwhp but the torque will be down a bit.