Who sells sleeved LS1 blocks?
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: Nov 2001
Location: Brownsburg, Indiana
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Who sells sleeved LS1 blocks?
Looking to build a 382, 388, or 396 (can you tell I'm in the early stages here?) and need to know who sells LS1 blocks already sleeved & honed, ready to assemble the motor... Any of our fine sponsors do it?
(EDIT: OK, I found ARE's re-sleeved blocks. Anybody else?)
(EDIT: OK, I found ARE's re-sleeved blocks. Anybody else?)
#2
TECH Veteran
Join Date: Aug 2002
Location: Hartsdale, NY
Posts: 4,055
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who sells sleeved LS1 blocks?
Valve God will sell you a new GM factory block ready for a stroker rotating assembly for $600.
http://www.smcperformance.com/
SDPC has the C5R block for around $6,000! They also sell 6.0 liter iron blocks which are 85lbs heavier...
Bored and resleeved ls1/ls6 blocks are somewhat pricy --- Our sponsors MTI, Augustino and Lingenfelter, sell these... --------------->
LPE uses a Darton wet sleeve but is still testing and has not shipped any yet; the other two vendors use dry sleeves and claim to have solved the dropped sleeve issues that plauged early dry-bore and re-sleeved blocks...
http://www.smcperformance.com/
SDPC has the C5R block for around $6,000! They also sell 6.0 liter iron blocks which are 85lbs heavier...
Bored and resleeved ls1/ls6 blocks are somewhat pricy --- Our sponsors MTI, Augustino and Lingenfelter, sell these... --------------->
LPE uses a Darton wet sleeve but is still testing and has not shipped any yet; the other two vendors use dry sleeves and claim to have solved the dropped sleeve issues that plauged early dry-bore and re-sleeved blocks...
#4
TECH Fanatic
iTrader: (1)
Join Date: Nov 2001
Location: Long Island,NY
Posts: 1,015
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who sells sleeved LS1 blocks?
JPR does this as well. He is finishing up my 427 now. The block is a Darton wet sleeve 4.125 witha Callies carnk @ 4.00 stroke. GREAT prices, he is a sponsor over there-------------->
#5
Re: Who sells sleeved LS1 blocks?
I am also interested in a rsleeve on my LPE 383 but would like the wet style Darton sleeve, the cam & heads are good just want to go up in cubic inch.
#6
TECH Veteran
Join Date: Aug 2002
Location: Hartsdale, NY
Posts: 4,055
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who sells sleeved LS1 blocks?
See our sponsor, LPE for Darton wet blocks ---->
Also see web page below:
http://www.strokerkits.com/darton_sleeves.htm
Also see web page below:
http://www.strokerkits.com/darton_sleeves.htm
#7
Re: Who sells sleeved LS1 blocks?
I have the LPE 383 package in a 01 Z06 and would love to bring them the car but i think they are trying to sell the package no the upgrade, i have had all the work done already, heads & cam are fine just want to up the cubes nothing more.