Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Please identify this hose and its function

Thread Tools
 
Search this Thread
 
Old Feb 27, 2009 | 11:28 PM
  #1  
Blevinator's Avatar
Thread Starter
On The Tree
 
Joined: Jun 2008
Posts: 138
Likes: 0
Exclamation Please identify this hose and its function

I have a 2001 trans am ls1. I just had headers, cam, and exhaust (with off road y pipe) installed.
There is a very large hose(1.5 inch...rough estimate) that runs from the front of the car, along the drivers fender (just inside it), then turns to go under the cowl panel along the firewall towards the passenger side.
It connects down low in the front of the car to what looks like (from above) a black box?
It is disconnected (open) at the end that is running along the firewall.

Can anyone please tell me what this hose is, and if it is ok to have disconnected?

Thanks !!
Reply
Old Feb 27, 2009 | 11:32 PM
  #2  
jrpimp00's Avatar
TECH Fanatic
20 Year Member
Photogenic
Photoriffic
iTrader: (17)
 
Joined: Jan 2004
Posts: 1,078
Likes: 1
From: Fayetteville, NC
Default

Its the air hose, used to pump air into the exhaust maniflds to warm up cats for the first few minutes when you start the car. You dont need it anymore since you got an ORY.
Reply
Old Feb 27, 2009 | 11:34 PM
  #3  
TranzAmMan's Avatar
Teching In
 
Joined: May 2008
Posts: 46
Likes: 0
From: Ohio
Default

I think it is for the AIR system. But done quote me on that, all I know is that I got rid of that when I did H/C swap. I kept it b/c it has some of the coolest bends I have ever seen.
Reply
Old Feb 27, 2009 | 11:35 PM
  #4  
TranzAmMan's Avatar
Teching In
 
Joined: May 2008
Posts: 46
Likes: 0
From: Ohio
Default

Originally Posted by jrpimp00
Its the air hose, used to pump air into the exhaust maniflds to warm up cats for the first few minutes when you start the car. You dont need it anymore since you got an ORY.
Guess you beat me too it. Good to know I got it right though
Reply
Old Feb 27, 2009 | 11:36 PM
  #5  
blakern's Avatar
TECH Regular
iTrader: (9)
 
Joined: Jan 2007
Posts: 462
Likes: 0
From: Kearney, NE
Default

yeah rip that crap out of there. I had mine hooked up for a few days wit my lts and ory and it made a back firing sound upon intial start-up. get rid of it....
Reply
Old Feb 27, 2009 | 11:49 PM
  #6  
Blevinator's Avatar
Thread Starter
On The Tree
 
Joined: Jun 2008
Posts: 138
Likes: 0
Default

Thanks all!! It made me worry seeing such a large hose connected to nothing!!
Appreciate the help!!
Blevinator
Reply




All times are GMT -5. The time now is 01:19 AM.