Any 6.0/MS4 with 2.5 PRC making good numbers?
#1
Teching In
Thread Starter
iTrader: (5)
Join Date: Oct 2007
Location: Amarillo Tx
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Any 6.0/MS4 with 2.5 PRC making good numbers?
I have just bought a 6.0 motor off a friend with stage 2.5 PRC heads on it. What kind of power can I expect from it??
Motor - 6.0
Pistons - Fly Cut
Rods - Stock
Crank - Stock
Camshaft - MS4
Heads - Stage 2.5 PRC milled to 59cc
I am in the process of buying a FAST 92/92 and i am putting it in a 98 Trans Am with a M6 and a 10 bolt with 411
I could use all the help I can get from all of the members out there.
Thanks Guys!
Motor - 6.0
Pistons - Fly Cut
Rods - Stock
Crank - Stock
Camshaft - MS4
Heads - Stage 2.5 PRC milled to 59cc
I am in the process of buying a FAST 92/92 and i am putting it in a 98 Trans Am with a M6 and a 10 bolt with 411
I could use all the help I can get from all of the members out there.
Thanks Guys!
#2
I have MS4 with PRC LS6 heads and makes great power. I don't think to many people have that combo. Lots of people are scared to Fly Cut. Hopefully someone with that setup or similar will chime in and help you out.
-Trevor
-Trevor