Best Cam Only but H/C later
#22
TECH Junkie
iTrader: (5)
its the nature of the high end hp cams....low torque down low.
while the MS3/4 are good cams, they seem to be more popular as "dyno queen" cams than real racing cams.
some guys get hung up on peak hp number.
i'll stick with my old grind cam making good torque all over, and hp peaking at 6300rpm
while the MS3/4 are good cams, they seem to be more popular as "dyno queen" cams than real racing cams.
some guys get hung up on peak hp number.
i'll stick with my old grind cam making good torque all over, and hp peaking at 6300rpm
#23
On The Tree
iTrader: (8)
Join Date: Sep 2008
Location: SC
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Well, I have a cam that was designed for a cam only car (see sig), but am still going to be putting on some Cartek 4X heads milled .030. I already know that I will have to flycut.
Still waiting on parts, but hope to get started very soon. I will post my results when finished.
Still waiting on parts, but hope to get started very soon. I will post my results when finished.