Parts shopping list (suggestions and input needed)
03-14-2009, 10:45 PM
#1
Teching In
Thread Starter
iTrader: (6)
Join Date: Oct 2006
Location: Dallas, Tx
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Parts shopping list (suggestions and input needed) Getting ready for a deployment and getting my bonus so finally get to do stuff to the car. I DO not want to cut corners on all the necessary stuff.
so far have on the list
Ls6 intake and ls6 heads with dual valve springs and torquer2 cam (need input on the combo getting good deal on heads so heads stay) ported ls6 oil pump, ls7 lifters, ls2 timing chain (good enough for this setup?) and texas speeds deluxe heads cam gasket kit (does it have everything i need?). And im not for sure on the arp bolts which ones do i need to be safe?
so far have on the list
Ls6 intake and ls6 heads with dual valve springs and torquer2 cam (need input on the combo getting good deal on heads so heads stay) ported ls6 oil pump, ls7 lifters, ls2 timing chain (good enough for this setup?) and texas speeds deluxe heads cam gasket kit (does it have everything i need?). And im not for sure on the arp bolts which ones do i need to be safe?
03-15-2009, 04:32 AM
#3
Teching In
Thread Starter
iTrader: (6)
Join Date: Oct 2006
Location: Dallas, Tx
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
its will be me and a few other guys trying to find someone with some ls1 install time under there belt that will work for beer 
when i get back on leave in july. i already have the hardened 7.4s in the car
when i get back on leave in july. i already have the hardened 7.4s in the car
03-15-2009, 08:09 AM
#4
TECH Regular
iTrader: (6)
Join Date: Oct 2008
Location: Belgium, WI
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
I will be doing a head/cam/intake swap on my Z06 in April/May. Check back with me later as I may have some mint low mile parts for sale. Car is a 03 Z06 and only has 10,000 miles. Will be taking off LS6 Intake, Fuel Rails & injectors, Cam, 243 Heads with lightweight valves, etc.
03-15-2009, 12:23 PM
#5
TECH Regular
iTrader: (1)
Join Date: Oct 2008
Location: Riverside/Los Angeles, Ca
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
LS2 Lifter trays
ARP Head Bolts
Fuel Injectors..Depends on duty cycle, and how much power your putting..Might want a New fuel pump to suplply the power too..Not Sure
New Lifters
Thats all i can think of right now
ARP Head Bolts
Fuel Injectors..Depends on duty cycle, and how much power your putting..Might want a New fuel pump to suplply the power too..Not Sure
New Lifters
Thats all i can think of right now