240+ cam guys
#21
TECH Junkie
Thread Starter
iTrader: (10)
Join Date: Oct 2007
Location: Tucson AZ
Posts: 3,261
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
cool. Thanks for all the info and opinions guys.
My tuner is a really good guy, tuned my truck spot on in about an hr then we put it on the dyno (NicD), wont EVER take it to anyone else after my issues with an e-mail tune.
my torque curve as is with this 221 is very smooth and just keeps building, ran out of fuel so my numbers are wrong but cutting it shy at 5200 RPM we made 325hp. So once the injectors and O2s are in we will finish it. Probably gonna rev to about 62-6300.
I have been really thinking about a 224/228 TSP. I just need the donkey dick to sell so I could swing said cam. A buddy of mine got a custom spec'd so Ill wait to see how that does before I do that route.
Also I have 241s on it right now, the next on the list for heads is a set of 853's (I believe? the earlier 241s.). They will be milled down .030 and ported, Im shooting for about 10.5:1.
Thanks again guys, I appreciate the feedback!
My tuner is a really good guy, tuned my truck spot on in about an hr then we put it on the dyno (NicD), wont EVER take it to anyone else after my issues with an e-mail tune.
my torque curve as is with this 221 is very smooth and just keeps building, ran out of fuel so my numbers are wrong but cutting it shy at 5200 RPM we made 325hp. So once the injectors and O2s are in we will finish it. Probably gonna rev to about 62-6300.
I have been really thinking about a 224/228 TSP. I just need the donkey dick to sell so I could swing said cam. A buddy of mine got a custom spec'd so Ill wait to see how that does before I do that route.
Also I have 241s on it right now, the next on the list for heads is a set of 853's (I believe? the earlier 241s.). They will be milled down .030 and ported, Im shooting for about 10.5:1.
Thanks again guys, I appreciate the feedback!
![Cheers!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cheers.gif)