MTI SS2 Cam Info On Assuring Its Stealthness - Inside
Thread Starter
TECH Senior Member
iTrader: (4)
Joined: Nov 2001
Posts: 7,000
Likes: 1
From: Lexington, Ky
MTI SS2 Cam Info On Assuring Its Stealthness - Inside In order for you to run this cam and it be stealth you MUST run a stock catback as per MTI. My brother found this out after we installed it and we heard it loping.
Just some FYI for those out there. It will lope with an aftermarket catback and/or cutout. Click on the link below for a sound clip through the cutout.
Here's a '00 WS6 with the following:
http://home.insightbb.com/~l.proctor1/ss2cam.mpg
Just some FYI for those out there. It will lope with an aftermarket catback and/or cutout. Click on the link below for a sound clip through the cutout.
Here's a '00 WS6 with the following:
- MTI Stealth II
- FLPs w/ORP
- Cutout
- Mangaflow Catback
- Stock VE table and stock Idle speed
http://home.insightbb.com/~l.proctor1/ss2cam.mpg
Last edited by CANNIBAL; Nov 2, 2003 at 12:43 PM.
