ls6 heads and intake?
TECH Fanatic
Joined: Oct 2003
Posts: 1,839
Likes: 0
I'm not going to contribute to your ridiculous posts any more but to say this. If you think there are negligible gains to be made in HP by going to the LS6 over the original LS1 intake you are plainly wrong.
I have been asking this the entire thread, but no one can do so!
If you think there are negligible gains to be made in HP by going to the LS6 over the original LS1 intake you are plainly wrong.
If you don't have any, STFU and stop acting stupid.
Please try to gather a little more information first and you won't come off like such an assclown.
The INTAKE port openings on the LS6 AND LS1 heads are the same, so what is this BS from you that the LS6 intake doesn't match LS1 heads? What the hell are you talking about?
I hate to say it, Bud, but JRP knows his stuff, as has been evident by his responses to several (read: many) threads posted in any number of the technical forums. I suggest you not argue with a rather well-known, and proven, fact. Good luck proving otherwise, though.
I'M NOT ARGUING WITH ANY FACTS! Actually, I don't see any facts being posted
I'm not trying to prove anything. If any of you morons had actually read my posts, you'd see that. So shut up.But the POINT is that I've never SEEN any numbers from the LS1-LS6 intake swap.
Have you seen any? Where did you see them? Can you show me?
This is all I'm asking!
PLEASE SOMEONE SHOW ME HOW MUCH HP LS6 INTAKE MAKES. IF IT IS GOOD, I WANT TO PUT ONE ON MY CAR PLZ K THX
Staging Lane
Joined: Jan 2003
Posts: 55
Likes: 0
From: Ottawa, Canada
Originally Posted by z98
SO SHOW ME
I have been asking this the entire thread, but no one can do so!
I have been asking this the entire thread, but no one can do so!
there, maybe this will shut you up.
Originally Posted by rickws6
and z98, who the **** just has a stock car then swaps an ls6 intake and dyno's, not many people. most people install there intake when doing other mods as a collective gain so your gonna have a hard time finding just an ls6 intake dyno.
Originally Posted by z98
Actually the question is about stock LS1 heads, regardless of other mods.
Originally Posted by JoSeY
dude call mti, tr, or any other sponsor and i'm sure they'll provide enough proof. for u to act like an idiot and say that the more volume, better flowing LS6 intake doesn't produce more hp just shows how illiterate you are on these cars. man why am i wasting my time, you'll never listen...but I DARE YOU to call any sponsor..I'm sure they'll have plenty of graphs w/only change being the intake to prove. now untill u do that..crawl back where u came from.
Staging Lane
Joined: Jan 2003
Posts: 55
Likes: 0
From: Ottawa, Canada
Originally Posted by Bowtieman4life
Any sponser will tell us the LS6 intake will make more power just to sell an intake. I bought one but don't know if it helped.
Originally Posted by Cobraeater
I dynoed with bolt-ons and the only change being the LS6 Intake and went from 338rwhp and 348rwtorque to 346rwhp and 358rwtorque.
nice numbers by the way
TECH Fanatic
Joined: Oct 2003
Posts: 1,839
Likes: 0
Well I have some people that say it is worthless with 98-00 heads.
I have some people saying it gives 10 hp.
And still other people saying to expect 25 hp.
So which is it? With a high lift cam, it looks like it will flow a bit more (most of the CFM gains were at +.5 in lift). With ported/01/02/LS6 heads it looks like it will flow a whole lot more.
But with a stock cam and stock heads, it doesn't look like it will give much gain at all.
So I don't know. There are some people (the +25 hp people) who say this has been proven time and again on the dyno. Where? If this is common knowledge, it should be easy to post up proof. I mean, how did it get to be common knowledge? If everyone "knows" the LS6 intake makes a lot more HP than the LS1 on pre-01 stock heads, how did everyone get to know this?
I'm gonna agree with bigeller. LS6 intake should be the last bolt on you should do. He seems to be the ONLY person who has tested every combination of LS1/LS6 heads/intakes, and the results say LS6 intake doesn't help LS1 heads that much.
If anyone one can show some decent HP gains, I'll be more than happy to change my mind about this.
In fact, I hope the LS6 gives a good HP gain over stock.
sigh...
I have some people saying it gives 10 hp.
And still other people saying to expect 25 hp.
So which is it? With a high lift cam, it looks like it will flow a bit more (most of the CFM gains were at +.5 in lift). With ported/01/02/LS6 heads it looks like it will flow a whole lot more.
But with a stock cam and stock heads, it doesn't look like it will give much gain at all.
So I don't know. There are some people (the +25 hp people) who say this has been proven time and again on the dyno. Where? If this is common knowledge, it should be easy to post up proof. I mean, how did it get to be common knowledge? If everyone "knows" the LS6 intake makes a lot more HP than the LS1 on pre-01 stock heads, how did everyone get to know this?
I'm gonna agree with bigeller. LS6 intake should be the last bolt on you should do. He seems to be the ONLY person who has tested every combination of LS1/LS6 heads/intakes, and the results say LS6 intake doesn't help LS1 heads that much.
If anyone one can show some decent HP gains, I'll be more than happy to change my mind about this.
In fact, I hope the LS6 gives a good HP gain over stock.
sigh...
