Matching a Streetsweeper cam with the correct head
Ed Curtis is the designer of the Street Sweeper cams that are on the FTI web site (his site). Ed is actually local to me and has a strong engineering background. I have no clue who Mike is.
j/k I was joking with him about Rhody in a thread in another place. Ed-Check with Mike...
Kyle-> Do you share the cam cards on these, or will I need to ask Mike for them?
I am just wondering on these grinds...I know of several people in the area
who run them...just trying to decide on the grind. I will still be going
through you for the kit.
Ed-I don't carry them since they were originally designed for AZPS but they can be recreated at any time. I do have the information on them.
Ed
Kyle- I have another question about your grinds. Do you still carry the AZPS02 and AZPS03 grinds?
Part of our convo before Ed squared me away. Idk know if Mike came up with the grinds, or Ed, but either way....they are a great series of cams. Maybe Ed designed the cams for Mike, I am not sure. Either way, Ed is a ******* Genius with cams. Maybe I was wrong with Mike creating them, but Ed did tell me to talk to Mike about the grinds to see which I wanted.
Kyle-> Do you share the cam cards on these, or will I need to ask Mike for them?
I am just wondering on these grinds...I know of several people in the area
who run them...just trying to decide on the grind. I will still be going
through you for the kit.
Ed-I don't carry them since they were originally designed for AZPS but they can be recreated at any time. I do have the information on them.
Ed
Kyle- I have another question about your grinds. Do you still carry the AZPS02 and AZPS03 grinds?
Part of our convo before Ed squared me away. Idk know if Mike came up with the grinds, or Ed, but either way....they are a great series of cams. Maybe Ed designed the cams for Mike, I am not sure. Either way, Ed is a ******* Genius with cams. Maybe I was wrong with Mike creating them, but Ed did tell me to talk to Mike about the grinds to see which I wanted.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Yea, I hear the lobes are custom too. I don't have too much info on them. Its great on the street though, as long as you treat it as a cammed vehicle...no 1500 rpm cruising and stuff like that. Very fun to drive that is for sure.
are AFR and ET heads the only heads this cam is good with? i have been considering this cam but when i started the thread everyone said it was junk 
. but the duration numbers are good for what im after. and i was considering using a set of PRC stage 2.5 LS6 ported heads with the cam. would this be a good set up? sorry for gettin off the subject don.
. but the duration numbers are good for what im after. and i was considering using a set of PRC stage 2.5 LS6 ported heads with the cam. would this be a good set up? sorry for gettin off the subject don. 
