stroker question and Lunati 395" advice
Thread Starter
TECH Fanatic
Joined: Jan 2002
Posts: 1,205
Likes: 0
From: harrisburg, pa
stroker question and Lunati 395" advice Getting ready for a rebuild. Anyone run the Lunati 395" stroker kit? Why wouldnt you choose that over the 382 for the same money?
Or is it far cheaper now to piece things together? What do you guys recommend? I dont want to resleeve. thanks
Or is it far cheaper now to piece things together? What do you guys recommend? I dont want to resleeve. thanks
TECH Veteran
Joined: Aug 2002
Posts: 4,055
Likes: 1
From: Hartsdale, NY
...i've asked a few times about this combination and the concensous seems to be that this is not a great idea....
...apparently, with the 4.125 stroke you tend to run high risk of blow-by since the pin is very high in the piston....
...also most are not fond of undersquare engines....they take longer to rev and don't rev as high but they do make a bunch of power down low...
...apparently, with the 4.125 stroke you tend to run high risk of blow-by since the pin is very high in the piston....
...also most are not fond of undersquare engines....they take longer to rev and don't rev as high but they do make a bunch of power down low...
