i have a 236/242 .580 .590 on 112 lsa. with no advance. with this cam work with stock head or is it going to have ptv clearance problems. car has supporting mod for this cam. thanks in advance.

 

the lift isnt too crazy, what kind of motor is it going in? I would say with stock ratio rockers you should have no problems, but im not really qualified to give you that kind of advice, im sure someone else will chime in. It should work though, good luck with the car.

 

346 all bolt ons 4000 stall 3.73 gears.

 

ttt...........

 

it oughta, my T-rex cam worked with stock heads.

 

That is similar to HPE "S" cam or MS3 (and the list goes on)
PTV clearance should be measured and cam degreed in. It will be a high rev cam, rough idle, requires professional tuning.

 

I have a great turner so i am not worried about that. I just wanted to know if it would work or not. It will be a street/strip car with more strip than street.

 

It will fit just fine. It looks like a Comp XE lobe grind.

 

Do you have this cam or something.

 

Ttt.>>>>>>>>>>>>

 

Ttt...............

 

ttt............