Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

75mm MAF connect to FAST 92/92

Thread Tools
 
Search this Thread
 
Old 12-06-2009, 04:37 PM
  #1  
Teching In
Thread Starter
 
kamarobuddy's Avatar
 
Join Date: Jun 2009
Location: Amarillo, Texas
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Question 75mm MAF connect to FAST 92/92

Tomorrow I am installing my FAST 92/92. The problem I have is connecting a stock size 75mm MAF to a giant 92mm Throttle body!!! what can I use to fit that mis matched 75mm maf to 92mm Throttle body?

I know what you thinking...buy a 92MM LID and larger MAF and solve my problem. Well hollidays are here and money is tight so I am currently going with the stock size LID and MAF.

what the heck can I buy to connect the stock size MAF to a FAST 92/92?

P.S. Will a Smooth bellow connect to a stock size maf and to a Fast 92 Throttle body or do I need a larger MAF for the smooth bellow and not as large Throttle body? AHHHH please help!
Old 12-06-2009, 04:46 PM
  #2  
TECH Senior Member
iTrader: (35)
 
99Bluz28's Avatar
 
Join Date: Nov 2007
Location: C. V., Kalifornia
Posts: 9,705
Likes: 0
Received 11 Likes on 11 Posts
Default

Re-post you tread here:

Generation III External Engine
Old 12-06-2009, 10:41 PM
  #3  
TECH Fanatic
iTrader: (9)
 
massls1guy's Avatar
 
Join Date: Nov 2005
Location: Mass
Posts: 1,311
Likes: 0
Received 0 Likes on 0 Posts

Default

The stock accordion style connector will fit over a 90mm TB with a little stretching. I'll bet it would stretch over the 92 as well to get you going anyway.
Old 12-07-2009, 01:00 AM
  #4  
Launching!
 
Sid447's Avatar
 
Join Date: Feb 2004
Posts: 260
Likes: 0
Received 0 Likes on 0 Posts

Default

As a suggestion,

Pick-up a second-hand GM 85mm maf-sensor from an LQ4-powered truck at a salvage yard.
And buy the conversion connector for the IAT/Maf wiring feed.
Old 12-07-2009, 05:13 AM
  #5  
11 Second Club
iTrader: (24)
 
Intercooler2's Avatar
 
Join Date: Mar 2008
Location: North East, MD
Posts: 2,554
Likes: 0
Received 2 Likes on 2 Posts
Default

If you cut about 3/8" off the end it fits even better. I got mine to fit over the 96mm TB doing this and it looks great.
Old 12-07-2009, 01:54 PM
  #6  
11 Second Club
iTrader: (49)
 
transam69230's Avatar
 
Join Date: Feb 2005
Location: Minnesota
Posts: 1,869
Likes: 0
Received 22 Likes on 14 Posts

Default

You could use the fernco mod. Get a 3.5 inch to 4inch coupler from home depot! I used that for over year until i switch to speed density.




All times are GMT -5. The time now is 03:14 AM.