Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

idle problem

Thread Tools
 
Search this Thread
 
Old 01-15-2010, 09:54 AM
  #1  
Teching In
Thread Starter
 
purplez281998's Avatar
 
Join Date: Dec 2009
Location: tullahoma,tn
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default idle problem

installed a nw 90mm throttle body and a fast 90mm intake last night.car idled a little high but not alot more than where it was at.well i forgot to unplug the sensors from the tb.well this morning i reset the throttle body and now it idles real high.around 2000rpm.my check engine light is on now and when i put it in reverse it died.went to start it back up and it wouldnt start.had to let it sit for about a min and it started but was real sluggish like it was choking out.i dont know if my iac or mas sensor cant read the more air flow or if theres a vaccum leak.i drove it last night after i installed it with no probs but after i reset the tb all hell broke loose.thanks for your help....it also whistles like a supercharger for a min or so then dies down.
Old 01-15-2010, 10:34 AM
  #2  
Teching In
Thread Starter
 
purplez281998's Avatar
 
Join Date: Dec 2009
Location: tullahoma,tn
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

also could it be a intake leak?the intake didnt sit plush.acted like it was a little warped but it tightened down fine.it wobbled just a tiny bit
Old 01-15-2010, 11:00 AM
  #3  
Teching In
Thread Starter
 
purplez281998's Avatar
 
Join Date: Dec 2009
Location: tullahoma,tn
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

problem solved.throttle boddy was stuck open a little bit.boy i look stupid lol




All times are GMT -5. The time now is 07:25 AM.