Head Debate
Thread Starter
TECH Enthusiast
iTrader: (13)
Joined: Jul 2007
Posts: 711
Likes: 0
From: South of South Ft Worth
Head Debate I know i've seen a bunch of threads where ppl are asking which aftermarket heads are better and once again im in the same situation.. Even after reading all the other post its hard decision for me..
Current setup--
Forged flat top 347
228/230 .571/.573 112 comp cam
853 cnc ported and polished 202/160valves 3 angle valvejob
supposed to flow close to 300cfm
1.8 harlensharp rockers
Vic Jr intake 90mm TB
put down 390hp/393tq , Run low 8.0 consistantly in my 2000 silverado full weight..
I've been looking at TrickFlow's 215cc heads and was wondering where i would be sitting at or would these even be worth spending $2k on them for a 20hp increase??
I know some of you guys have already been down this road thats y i came here for advice
Thanks Ray
Current setup--
Forged flat top 347
228/230 .571/.573 112 comp cam
853 cnc ported and polished 202/160valves 3 angle valvejob
supposed to flow close to 300cfm
1.8 harlensharp rockers
Vic Jr intake 90mm TB
put down 390hp/393tq , Run low 8.0 consistantly in my 2000 silverado full weight..
I've been looking at TrickFlow's 215cc heads and was wondering where i would be sitting at or would these even be worth spending $2k on them for a 20hp increase??
I know some of you guys have already been down this road thats y i came here for advice
Thanks Ray
Last edited by bigboy576103; Jan 19, 2010 at 07:10 AM.
Thread Starter
TECH Enthusiast
iTrader: (13)
Joined: Jul 2007
Posts: 711
Likes: 0
From: South of South Ft Worth
