PAC 1518's or Duals??
#22
TECH Fanatic
iTrader: (1)
Join Date: Feb 2004
Location: Goshen,In.
Posts: 1,027
Likes: 0
Received 0 Likes
on
0 Posts
which ever spring you choose to run,make sure it is set up correctly..some of the spring failures i've seen are due to improper set up..use a quality pushrod(stiffer the better,i would go with Manton or Trend,at least 11/32 dia)correct preload,good swipe pattern on the valves and proper spring height..
this sounds obvious,but a lot of folks just order springs/pushrods and throw them on without checking anything..
this sounds obvious,but a lot of folks just order springs/pushrods and throw them on without checking anything..