DVS99TRANS

iTrader: (7)

MS3(114) sitting pretty at 900. Sounds like it lobes less in a stroker.

Azrael

iTrader: (10)

257/266 .646/.646 114 +4 (33.5° of overlap) even at 1100 rpm has quite a bit of lope, re-tune coming Friday.

DSkyles

iTrader: (1)

232/238 595/605 112+2 idles around 850

soundengineer

iTrader: (16)

have a 234/242 on order...
it will idle at what ever RPM I want it to cause I am a tuning Jedi....

but I'm going to leave it at stock idle rpm of 800...

joik307

iTrader: (2)

I have a 233/239 (113) and it idles at about 630 its a m6.

[youtube]zb8ubz0NR3w[/youtube]

twitchtwice

iTrader: (12)

My 228r - 228/228 .588/.588 112 idles at around 750-800 once warm. Cold its about 1k and slowly lowers down.

Hey orangepeel, i noticed you have the same cam as me (unless you have a different lsa), what is the overlap for this cam?

KevinR

Cam in sig idles at 950

Cape T/A

MS3 113 lsa about 900rpm

Phantom

iTrader: (16)

231/239 .615/.601 113LSA in a 5.3 800-850 rpm idle

http://www.youtube.com/watch?v=GX2XgusQtkA

1SLwLS1

iTrader: (6)

MS4 239/242 0.649/0.609 111+1 @ 900-950 RPMs depending on idle conditions, AC, load, heat soak, temp, etc.

Jump to ~2:00 minutes for open cutout warm idle

http://www.youtube.com/watch?v=0H-nCBHkX2g