milled 243s
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: Mar 2007
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
milled 243s
i have a set of milled .030 243s to put on my 5.3 w/a .040 headgasket. will my stock pushrods work or do they need to be .030 shorter?? btw i have a ls1 cam in it now(came w/motor, going to upgrade to a tr220 later).
#2
FormerVendor
iTrader: (18)
I'm guessing you are going to need a shorter pushrod for that. Best option is the Comp PR checker. $20 tool will save you a lot of trouble later. Here's a link:
http://www.texas-speed.com/shop/item...d=913&catid=51
Jon
http://www.texas-speed.com/shop/item...d=913&catid=51
Jon