Generation III Internal Engine 1997-2006 LS1 | LS6

Sponsored by:

799/243

Reply Subscribe

Search this Thread

Old

May 6, 2010 | 07:29 AM

#1

Thread Starter

Teching In

Joined: Nov 2009

Posts: 44

Likes: 0

From: Kentwood, LA

Default

799/243

I picked up a set of heads off a twin turbo C6, the castings are 243 on one side and 799 on the other. The #7 piston exploded and bent a valve. can this be fixed and be reliable?

Attached Thumbnails

799/243-head-1.jpg

799/243-head-2.jpg

Last edited by CajunZ; May 6, 2010 at 07:39 AM.

Old

May 6, 2010 | 07:40 AM

#2

Thread Starter

Teching In

Joined: Nov 2009

Posts: 44

Likes: 0

From: Kentwood, LA

Default

a lil help guys, PLEASE

Old

May 6, 2010 | 07:43 AM

#3

8 Second Club

iTrader: (13)

Joined: Dec 2003

Posts: 1,015

Likes: 103

From: Battle Ground, WA

Default

I don't see why not. Take t to a machine shop and have a pro look at it.

Old

May 6, 2010 | 07:50 AM

#4

Thread Starter

Teching In

Joined: Nov 2009

Posts: 44

Likes: 0

From: Kentwood, LA

Default

even if they weld it, can i throw a 600 lift cam in there with .675 rated springs and run it?

Old

May 6, 2010 | 08:43 AM

#5

TECH Senior Member

Joined: Feb 2009

Posts: 5,445

Likes: 4

Default

you can have the head pressure tested. cc the chambers,and mill to match chamber sizes.

Reply Subscribe

288r, 799, cam, head, texasspeed

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 06:40 AM.