My Build!!! The forged 347 that does'nt know what it wants!
#41
Launching!
Thread Starter
iTrader: (15)
Join Date: May 2010
Location: Pensacola, FL
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Well... I just can't win guys. There's not gonna be enough time to get this build done and the car running before I have to move to Florida. I got a month or less before the cars gotta be ready to go. I called my boy Chad a PM&E to get the motor put back together with all fresh gaskets, bearings, and rings. Looks like this threads taking a interesting turn ha?
#46
Launching!
Thread Starter
iTrader: (15)
Join Date: May 2010
Location: Pensacola, FL
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Was suppose to have my motor back last week, but my main bearings got back ordered. Called again today and recieved some more bad news, because my crank got a little rust on it while I was gone it needed a polish which put the journals right at the minimum clearances if that makes any sence. Hope everything is gonna work out.
#57
Launching!
Thread Starter
iTrader: (15)
Join Date: May 2010
Location: Pensacola, FL
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
So I finally got the clutch on. Today is Saturday the 25th and I have about 6 days to get everything ready to ship.
Drilled some hole in the lifter for oil flow.
Drilled some hole in the lifter for oil flow.
Last edited by Datankid069; 03-28-2011 at 08:55 PM.
#58
Launching!
Thread Starter
iTrader: (15)
Join Date: May 2010
Location: Pensacola, FL
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
I've been very busy getting ready to leave here soon so I'm playing catch up with the thread.
Primed.
Masked up the valley cover for a little paint.
Here's some pictures of the block after paint. I thought it came out pretty good for a rush job.
Primed.
Masked up the valley cover for a little paint.
Here's some pictures of the block after paint. I thought it came out pretty good for a rush job.
Last edited by Datankid069; 03-28-2011 at 08:57 PM.
#59
Launching!
Thread Starter
iTrader: (15)
Join Date: May 2010
Location: Pensacola, FL
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
The oil pan was next. I kicked my self in the a** because I really dont have time to be painting anything. I leave Island in 3 days and i still need to assemble and find a tuner.
#60
Launching!
Thread Starter
iTrader: (15)
Join Date: May 2010
Location: Pensacola, FL
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Well you guys can see that the heads are on and already torqued, but check this out. I'm geting the gaskets ready and i remember these things:
I think there called cylinder head dowl pins. Anyways I only have 3. With 3 days on the clock I really cant aford to be screwing up like this.
I think there called cylinder head dowl pins. Anyways I only have 3. With 3 days on the clock I really cant aford to be screwing up like this.
Last edited by Datankid069; 03-28-2011 at 09:00 PM.