ASA cam is in. 'with idle vid"
#23
TECH Apprentice
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That's why I was thinking about running that cam in my set-up. It's made by GM, proven and easy on valve train parts, not to mention, it has a naaaaaasty-*** idle! I just wonder if it will pass the sniffer test, as I am in California and have to smog my vehicle every other year...
To the OP. Congrats. Sounds great, and glad it seems to be working for you. I wouldn't call myself an "ASA" hater, but I only ran that cam for a couple months before going custom. Didn't work for me, running 3.42's with the six speed. Always wanted to surge around 1500 give or take 200 rpm. Not to mention it never made good power for me, 360rwhp with supporting bolt ons. After two dyno tunes I gave up on it.
But like I said, glad to hear it's working for you.
#24
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Sounds good!
Make sure you find a good tuner. Mine has been back to the tuner 4 times and it still isnt right.
Check out my youtube page for some vids of mine..
http://www.youtube.com/user/DaddyOutlaw
Make sure you find a good tuner. Mine has been back to the tuner 4 times and it still isnt right.
Check out my youtube page for some vids of mine..
http://www.youtube.com/user/DaddyOutlaw
#25
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: May 2007
Location: Buffalo, NY
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
To the OP. Congrats. Sounds great, and glad it seems to be working for you. I wouldn't call myself an "ASA" hater, but I only ran that cam for a couple months before going custom. Didn't work for me, running 3.42's with the six speed. Always wanted to surge around 1500 give or take 200 rpm. Not to mention it never made good power for me, 360rwhp with supporting bolt ons. After two dyno tunes I gave up on it.
But like I said, glad to hear it's working for you.
But like I said, glad to hear it's working for you.
Sounds good!
Make sure you find a good tuner. Mine has been back to the tuner 4 times and it still isnt right.
Check out my youtube page for some vids of mine..
http://www.youtube.com/user/DaddyOutlaw
Make sure you find a good tuner. Mine has been back to the tuner 4 times and it still isnt right.
Check out my youtube page for some vids of mine..
http://www.youtube.com/user/DaddyOutlaw
#27
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: May 2007
Location: Buffalo, NY
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
so i had it partially tuned . it runs good.. needs some idle adjustment yet. but overall it runs like a champ. very decent manners around town and the sound of it turns heads . on the thruway , it drives almost like a stocker. its actually fun as hell on the thruway. gas mileage suffered quite a bit, not that i care at this point.
so today i took it to the local 1/8th mile track.
i was pretty happy with the results. a little more tuning it will be better. and it was like 90 out with 80% humidity. this cam makes a good amount of torque, it pulled hard alll the way through the run.
best ET 7.84 at 87.26 with a 1.71 60ft.
so today i took it to the local 1/8th mile track.
i was pretty happy with the results. a little more tuning it will be better. and it was like 90 out with 80% humidity. this cam makes a good amount of torque, it pulled hard alll the way through the run.
best ET 7.84 at 87.26 with a 1.71 60ft.
![](http://i174.photobucket.com/albums/w95/drillsgt98th/ETslip.jpg)