purposed ptv clearance? anybody
purposed ptv clearance? anybody hey guys
i was curious if you could tell me how tight this setup would be ptv clearance wise
AFR 205's milled to 60cc
comp 926 springs 150, 450, seat and open pressure
tsp torquer v3 cam spec's (231/234, .643"/.598" 111 LSA)
completely stock short block
yella terra rockers
new lifters and 7.4 pushrods
i was curious if you could tell me how tight this setup would be ptv clearance wise
AFR 205's milled to 60cc
comp 926 springs 150, 450, seat and open pressure
tsp torquer v3 cam spec's (231/234, .643"/.598" 111 LSA)
completely stock short block
yella terra rockers
new lifters and 7.4 pushrods
I have AFR's milled to 60cc, a 224/228 XER cam on a 114 and my intake was below the recommended 0.080" minimum on the intake. That cam will either have very low clearance or none due to its longer duration and lower LSA.
hey guys
i was curious if you could tell me how tight this setup would be ptv clearance wise
AFR 205's milled to 60cc
comp 926 springs 150, 450, seat and open pressure
tsp torquer v3 cam spec's (231/234, .643"/.598" 111 LSA)
completely stock short block
yella terra rockers
new lifters and 7.4 pushrods
i was curious if you could tell me how tight this setup would be ptv clearance wise
AFR 205's milled to 60cc
comp 926 springs 150, 450, seat and open pressure
tsp torquer v3 cam spec's (231/234, .643"/.598" 111 LSA)
completely stock short block
yella terra rockers
new lifters and 7.4 pushrods
There has been atleast 2 of these threads this week. See if any of this info will help.
https://ls1tech.com/forums/generatio...clearance.html
https://ls1tech.com/forums/generatio...led-heads.html
