PLease post your 224 clips
Thread Starter
TECH Enthusiast
Joined: Sep 2003
Posts: 617
Likes: 0
From: South East PA
PLease post your 224 clips i have searched this board for a while now and am looking for clips of a 224 cam setup, i am not sure which company to with yet, but leaning towards a setup from TSP or TR. If you can post any clips you have that would be awesome, esp with a magnaflow exhaust and some long tubes.. haha, if you know as to which would be better for me as far as each companies lift let me know, i have to pass smog so let me know thanks guys...
Check my website at the bottom; Angie from TR sent it to me a couple of years ago. I think it's thru a Hooker catback. Called 'Why I chose TR224 112'
Originally Posted by Viper
Check my website at the bottom; Angie from TR sent it to me a couple of years ago. I think it's thru a Hooker catback. Called 'Why I chose TR224 112'
Originally Posted by jrp
you can hear my 230 110.5lsa clip in sig 
j/k love the bump, cant wait to hear it through my cutout. it will be awful. people already acuse me of haveing a cam in the car with it open. i tell them i do it called a stock one.
Trending Topics
Originally Posted by SMOKIN01TA
man that sounds almost stock
j/k love the bump, cant wait to hear it through my cutout. it will be awful. people already acuse me of haveing a cam in the car with it open. i tell them i do it called a stock one.
j/k love the bump, cant wait to hear it through my cutout. it will be awful. people already acuse me of haveing a cam in the car with it open. i tell them i do it called a stock one.
. my clip was just jet hots, catted Y, and magnaflow and an 800rpm idle. LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Originally Posted by jrp
its gonna be crazy through your cutout . my clip was just jet hots, catted Y, and magnaflow and an 800rpm idle.
. my clip was just jet hots, catted Y, and magnaflow and an 800rpm idle. wont be long i just waiting on a deal i have working to close then ill have 8k to blow. on paying off the truck that is. but only with wast left after the cam. 
http://www.atlstreetdemonz.com/Multimedia/josh2.WMV
Excuse the hood.. it was half an inch over too far as I fired the car up soon as the cam was in, and I hadn't yet adjusted the hood.
Peace,
Excuse the hood.. it was half an inch over too far as I fired the car up soon as the cam was in, and I hadn't yet adjusted the hood.
Peace,
Thread Starter
TECH Enthusiast
Joined: Sep 2003
Posts: 617
Likes: 0
From: South East PA
Originally Posted by distortion_69
http://www.atlstreetdemonz.com/Multimedia/josh2.WMV
Excuse the hood.. it was half an inch over too far as I fired the car up soon as the cam was in, and I hadn't yet adjusted the hood.
Peace,
Excuse the hood.. it was half an inch over too far as I fired the car up soon as the cam was in, and I hadn't yet adjusted the hood.
Peace,
