H/C...What to get?
09-13-2010, 07:24 PM
#1
Registered User
Thread Starter
Join Date: Aug 2010
Location: Derby, KS
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
H/C...What to get? So i got about 3k for some new Heads, Camshaft, Valve springs, Pushrods and what not. Im looking at either Texas Speed or Vengeance racing. Right now I have long tube headers, Flowmaster Catback, K&N CAI, and planning on 3600 yank stall. Hoping to get a nice big cam with a rough idle and it'll be drivin causally with drag....Any ideas?
09-13-2010, 07:29 PM
#2
Teching In
Join Date: Apr 2009
Location: VA Beach
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Look at Performance Induction 215'S. That head can grow and grow so lots of potential and its micro polishing is pretty. This head also uses stock offset rockers!
Mario
Mario
09-13-2010, 08:59 PM
#4
Honestly none!! use that money to get your tranny built and for your converter. You might have enough for atleast a cam possibly. The reason i say that is because that would suck to blow 3k and your tranny takes a **** while you are getting it tuned or driving it home off the dyno. Do it smart.. build your tranny and rear end to take the abuse.