Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Engine Break-In / Synthetic or Dino Oil?

Thread Tools
 
Search this Thread
 
Old 02-25-2003 | 08:10 PM
  #1  
Godzilla's Avatar
Thread Starter
Teching In
 
Joined: Nov 2002
Posts: 28
Likes: 0
Default Engine Break-In / Synthetic or Dino Oil?

Which oil did you use on your newly built engine - synthetic or dino?
Old 02-26-2003 | 05:43 AM
  #2  
Patman's Avatar
TECH Senior Member
 
Joined: Nov 2001
Posts: 7,234
Likes: 1
From: Mississauga, Ontario
Default Re: Engine Break-In / Synthetic or Dino Oil?

So many new cars come with synthetic that it is safe to run on a new engine, however it's a waste since you should do a few frequent changes on a new engine, one at 500 miles, one at 1500 to 2000, and then slowly work your way to higher intervals later. The LS1 puts out a lot of copper into the oil when new, which doesn't seem to cause more engine wear but it's still a good idea to get it out of there.
Old 02-27-2003 | 01:57 AM
  #3  
OBSSSD@work's Avatar
Banned
 
Joined: Mar 2002
Posts: 184
Likes: 0
From: Lewisville, Tx.
Default Re: Engine Break-In / Synthetic or Dino Oil?

Dino 10W-30 to 5,000 miles here

Changed at 500, 1500, 3000, and then syntheticc at 5,000 <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />




All times are GMT -5. The time now is 02:50 PM.