etp ported heads vs ported 241 heads
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jan 2011
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i got a set of ported 4.8 et heads and i also have a set 241 ported heads which set will work the best on a 346 with a eps cam 228/230 cam ?? i have all the normal boltons on the motor let me know which will work the best
#2
TECH Senior Member
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have never seen those ETP heads before so I will just tell you what I know.
Cary does great work.
I don't think he has done those heads for 6-7 years .. not really sure but been a while..
I spoke with him and he told me those heads were 235cc+/- A lot on here will say that will make them a dog down low but by that reasoning LS3/L92's would suck too....
I would be very tempted to try them...
Cary does great work.
I don't think he has done those heads for 6-7 years .. not really sure but been a while..
I spoke with him and he told me those heads were 235cc+/- A lot on here will say that will make them a dog down low but by that reasoning LS3/L92's would suck too....
I would be very tempted to try them...
#3
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jan 2011
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
ya i got ported 241s on the car right now that was ported my a local machine shop i picked these heads up off a guy and was wandering what ppl had to say about them cause i have never heard or seen anyone running them... they have 2.05 intake valves and 1.57 exhaust valve the port job looks awesome on them i hope they will work good