Custom eps cam and 243 heads
02-05-2011, 05:14 PM
#22
yeah I know pred, the calculator I have which shows IVC and .006 lift values...I used the ones from a x-er cam since it will most likely be the closest to eps lobes...it will definitely be pretty close
Last edited by chrs1313; 02-05-2011 at 05:30 PM.
02-05-2011, 05:29 PM
#23
http://www.youtube.com/watch?v=cqZye...e_gdata_player
so assuming your .006 duration is 283 like a x-er lobe (you can call geoff so we can be exact) 112+4
dcr 8.79:1 with 60cc
dcr 8.91:1 with 59cc
a bigger intake duration cam will bleed off more compression...also a smaller advance will lower it too for the same lsa...
give geoff a call and we can know exactly if you want
02-05-2011, 06:12 PM
#24
11 Second Club
iTrader: (14)
Join Date: May 2007
Location: Aurora IL
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
idle around 1050rpm ( a little high but I don't mind especially when my stereo is in with the 2 amps drawing)
http://www.youtube.com/watch?v=cqZye...e_gdata_player
so assuming your .006 duration is 283 like a x-er lobe (you can call geoff so we can be exact) 112+4
dcr 8.79:1 with 60cc
dcr 8.91:1 with 59cc
a bigger intake duration cam will bleed off more compression...also a smaller advance will lower it too for the same lsa...
give geoff a call and we can know exactly if you want
http://www.youtube.com/watch?v=cqZye...e_gdata_player
so assuming your .006 duration is 283 like a x-er lobe (you can call geoff so we can be exact) 112+4
dcr 8.79:1 with 60cc
dcr 8.91:1 with 59cc
a bigger intake duration cam will bleed off more compression...also a smaller advance will lower it too for the same lsa...
give geoff a call and we can know exactly if you want
Before the rear bumper got dragged 140 feet hahaha
