When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Jon, what is the preferred method of keeping the lifters up while doing a cam with the heads still installed?
(yeah, I know, it's probably been asked 1000 times!)
there is a specific tool for it but most ppl use a couple of long rods that slide into the block to keep the lifters up, look up ls1howto.com or try a search to find the specific size of the rod
Small wooden dowel rods, sharpen one end on each. rotate the cam a few times to push lifters up, slide dowels in holes adjacent to cam, lifters will now be safe from falling into motor.