Anticipation is killing me
Thread Starter
Teching In
Joined: Feb 2004
Posts: 42
Likes: 0
From: St Louis
Anticipation is killing me Does anyone have a Sound Clip for this Cam or a Cam real close to it?
TR Custom "Reverse Split" Camshaft - 227/224 .569/.563 114 LSA
I am getting it installed next month and I have been unable to find a sounclip for it.
With or without Headers would be great.
Any help would be greatly appreciated.
TR Custom "Reverse Split" Camshaft - 227/224 .569/.563 114 LSA
I am getting it installed next month and I have been unable to find a sounclip for it.
With or without Headers would be great.
Any help would be greatly appreciated.
I used to have the 224/224 on a 114. You have nothing to worry about it idled real nice, almost stockish. If you are going to ask for idle sound files make sure you know what RPM the are programmed to idle at. I think mine was around 900 on an M6.
Originally Posted by 9T9BlueTA
I used to have the 224/224 on a 114. You have nothing to worry about it idled real nice, almost stockish. If you are going to ask for idle sound files make sure you know what RPM the are programmed to idle at. I think mine was around 900 on an M6.
Hey BlueTa, I was considering the same cam, but I drive over 100mi each day on the highway. Can i cruise easily at around 65mph with this cam, or will there not be enough "oomph". In other words, did you lose any low end? Thanks!
TECH Apprentice
Joined: Jul 2002
Posts: 310
Likes: 0
From: Shreveport, LA
Anticipation is killing me is killing you!!!! I have had heads and cam 224/224 112 sitting at the house waiting for install since last july. Now talk about anticipation killing me. I still have to wait till next month to put on mine. When ever I get out of Iraq.
Warren
Warren
Thread Starter
Teching In
Joined: Feb 2004
Posts: 42
Likes: 0
From: St Louis
Warren, I wish you a safe return and good luck on getting your H/C Package installed quickly.
Thank you very much for what you are doing to protect our freedom.
Now about that sound clip....................?
Thank you very much for what you are doing to protect our freedom.
Now about that sound clip....................?
Originally Posted by Z28_HESS
Anticipation is killing me is killing you!!!! I have had heads and cam 224/224 112 sitting at the house waiting for install since last july. Now talk about anticipation killing me. I still have to wait till next month to put on mine. When ever I get out of Iraq.
Warren
Warren
Trending Topics
wfols1- It has "A Little" lope to it but with the 114 VERY little. I have TTS long tubes and Borla I used to run wide open it sounded real nice. I was REALLY surprised how tame that cam was. I would image that the 112 with give you a choppier idle.
Grimey (sorry simpsons joke)- Depends on what you mean my oomph. Our cars have enough oomph stock. I dont recall any loss but if there was it was too small to notice.
Grimey (sorry simpsons joke)- Depends on what you mean my oomph. Our cars have enough oomph stock. I dont recall any loss but if there was it was too small to notice.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
Teching In
Joined: Feb 2004
Posts: 42
Likes: 0
From: St Louis
Cam Clip Host Dazman,
This was posted on a different thread on this site that I requested the Cam Clip.
This Member Chili Pepper says that he will host them.
Chili Pepper
Registered User
Join Date: Nov 2003
Posts: 106
Location: Northern VA
Quote:
Originally Posted by wfols1
Hey guys I am new here and first want to say this is a great site!!
Second I have a question, does anyone have a clip of the TR 227/224 reverse split cam?
With or without Headers but with would be great.
Welcome to the board. I haven't come across a clip with this cam in it yet, but if anybody has one I would be happy to host it for them.
__________________
1998 Cayenne Red Z28
LS1 Sounds - Your Complete Exhaust Resource
Pictures | Vig 3200 | Free mods | TSP lid | HPP3
8.516 @ 81.15 -- 1.843 60-ft. (1/8th mile, before mods)
This was posted on a different thread on this site that I requested the Cam Clip.
This Member Chili Pepper says that he will host them.
Chili Pepper
Registered User
Join Date: Nov 2003
Posts: 106
Location: Northern VA
Quote:
Originally Posted by wfols1
Hey guys I am new here and first want to say this is a great site!!
Second I have a question, does anyone have a clip of the TR 227/224 reverse split cam?
With or without Headers but with would be great.
Welcome to the board. I haven't come across a clip with this cam in it yet, but if anybody has one I would be happy to host it for them.
__________________
1998 Cayenne Red Z28
LS1 Sounds - Your Complete Exhaust Resource
Pictures | Vig 3200 | Free mods | TSP lid | HPP3
8.516 @ 81.15 -- 1.843 60-ft. (1/8th mile, before mods)
Launching!
Joined: Feb 2004
Posts: 233
Likes: 1
From: STL, MO
I should have before and after sound clips this coming Sunday to the earliest..
talk about waiting I have had the cam kit since the middle of December and it is f_c_ing eating me up!!
And another Thanks to Warren over in Iraq, you should be rewarded with around 400+ RWHP when you get the H/C package installed.!!.
talk about waiting I have had the cam kit since the middle of December and it is f_c_ing eating me up!!
And another Thanks to Warren over in Iraq, you should be rewarded with around 400+ RWHP when you get the H/C package installed.!!.
