daily driver???
Thread Starter
Registered User
Joined: May 2011
Posts: 3
Likes: 0
daily driver??? Hello everyone im new to the site. I was just wondering if a 1999 ls1 camaro with all these mods would be good for a daily driver:
PRC 220cc Stage 2.5 CNC Ported 5.3 Heads
Cometic Gaskets and ARP Bolts
Texas Speed Torquer V-2 Cam
Comp Cams Valvetrain Kit Hardened Pushrods, Roller Lifters, Titanium Retainers, 918 Valve Springs
Comp Cams Pro Magnum Roller Rockers
FAST 92/92mm Intake T-Body
39lb injectors and ported maf
Pacesetter Longtube Headers
Corvette fuel rail covers
BMR strut tower brace
MSD wires
SLP exhaust
Im thinkin about purchasing a camaro that has all these mods and i was wondering if it would be ok for a daily driver? Any input would be great. thanks
PRC 220cc Stage 2.5 CNC Ported 5.3 Heads
Cometic Gaskets and ARP Bolts
Texas Speed Torquer V-2 Cam
Comp Cams Valvetrain Kit Hardened Pushrods, Roller Lifters, Titanium Retainers, 918 Valve Springs
Comp Cams Pro Magnum Roller Rockers
FAST 92/92mm Intake T-Body
39lb injectors and ported maf
Pacesetter Longtube Headers
Corvette fuel rail covers
BMR strut tower brace
MSD wires
SLP exhaust
Im thinkin about purchasing a camaro that has all these mods and i was wondering if it would be ok for a daily driver? Any input would be great. thanks
it will be ok as long as the tune is good, it might buck a little down low in the rpms bacause of that cam and you might have to replace those valvesprings after a few miles but it should be fine.
Hello everyone im new to the site. I was just wondering if a 1999 ls1 camaro with all these mods would be good for a daily driver:
PRC 220cc Stage 2.5 CNC Ported 5.3 Heads
Cometic Gaskets and ARP Bolts
Texas Speed Torquer V-2 Cam
Comp Cams Valvetrain Kit Hardened Pushrods, Roller Lifters, Titanium Retainers, 918 Valve Springs
Comp Cams Pro Magnum Roller Rockers
FAST 92/92mm Intake T-Body
39lb injectors and ported maf
Pacesetter Longtube Headers
Corvette fuel rail covers
BMR strut tower brace
MSD wires
SLP exhaust
Im thinkin about purchasing a camaro that has all these mods and i was wondering if it would be ok for a daily driver? Any input would be great. thanks
PRC 220cc Stage 2.5 CNC Ported 5.3 Heads
Cometic Gaskets and ARP Bolts
Texas Speed Torquer V-2 Cam
Comp Cams Valvetrain Kit Hardened Pushrods, Roller Lifters, Titanium Retainers, 918 Valve Springs
Comp Cams Pro Magnum Roller Rockers
FAST 92/92mm Intake T-Body
39lb injectors and ported maf
Pacesetter Longtube Headers
Corvette fuel rail covers
BMR strut tower brace
MSD wires
SLP exhaust
Im thinkin about purchasing a camaro that has all these mods and i was wondering if it would be ok for a daily driver? Any input would be great. thanks
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
