LS1TECH - Camaro and Firebird Forum Discussion

Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

02 LS6 Spring Same dimension size as 01 LS6? Same seats/retainers? Installed height?

Thread Tools
 
Search this Thread
 
Old 02-27-2004 | 01:01 AM
  #1  
Steve01SS's Avatar
Steve01SS
Thread Starter
TECH Enthusiast
iTrader: (43)
 
Joined: Jan 2004
Posts: 728
Likes: 5
From: Orlando FL
Default 02 LS6 Spring Same dimension size as 01 LS6? Same seats/retainers? Installed height?
I'm thinking about swapping for an 02 LS6 cam and 02 LS6 springs and am wondering on my valve springs. I have 01 LS6's in there now with my hotcam. Will all my retainers and seats and all work? What about installed height?

All I have to do is swap the 01 springs for the 02's?

Thanks
Steve
Last edited by Steve01SS; 02-27-2004 at 01:07 AM.
Reply Like
Old 02-27-2004 | 01:19 AM
  #2  
Jason99T/A's Avatar
Jason99T/A
I can shift faster than you.
iTrader: (21)
 
Joined: Nov 2001
Posts: 5,133
Likes: 0
From: Baton Rouge, LA
Default
Originally Posted by Steve01SS
I'm thinking about swapping for an 02 LS6 cam and 02 LS6 springs and am wondering on my valve springs. I have 01 LS6's in there now with my hotcam. Will all my retainers and seats and all work? What about installed height?

All I have to do is swap the 01 springs for the 02's?

Thanks
Steve
You can use the same retainers, seats, and locks. Just swap the '02 springs in and go.

Jason
Reply Like
Old 02-27-2004 | 11:39 AM
  #3  
Steve01SS's Avatar
Steve01SS
Thread Starter
TECH Enthusiast
iTrader: (43)
 
Joined: Jan 2004
Posts: 728
Likes: 5
From: Orlando FL
Default
Thanks Jason... I'm still chasing surge demons with my car with the hotcam. Thats the reason I was thinking of swapping it out...

Thanks
Steve
Reply Like
Tags
Back to Subforum
Generation III Internal Engine
View Next Unread
Are my calcs right? (compression ratio)




Advanced Search

All times are GMT -5. The time now is 07:16 PM.