Crowley

I currently have the G5 cam (Original).. with the heads I'm going to install an S2 Shaner TB as well ...

I was thinking about a bigger cam, but I don't know about FLY CUTTING ... this is my daily driver .. is it going to be worth it to go bigger? If so .. what should I do?

Also .. I funds are limited as I have a feeling I will need a new clutch as well

Crowley

VSGLS1

iTrader: (8)

If it is a daily driver plan on replacing the valve springs due to the higher lift cam after a few years or less. The cam you have now should do just fine. I will probably be using Absolute Speed heads for my next combo.

Josh

iTrader: (9)

Good choice. I wish I could afford some AS heads.

Josh

Crowley

He just had a GP on them .. you may still be able to get in (look in the GP area) ..

Crowley

94form2000z

iTrader: (10)

Like I've already stated.. Excellent choice. Ask about the Crane Gold springs!

SLowETz

iTrader: (12)

Congrats!.... I've never owned a set of Jay's heads but hearing from those who have, I'm sure you'll be pleased! Run the current cam....can't see much gain from going "slightly" bigger. A GOOD tune will net you the desired results.

mike m

iTrader: (6)

Excellent choice man. you'll be happy to have a set of heads where you will have Absolutely NO issues and Proven HP gains.